Maxfine MXF 150-4N parts help - Page 2

lemortede · 02-03-2016, 02:26 PM

Quote:

Originally Posted by Weldangrind

An inexpensive vernier caliper is a terrific investment. Grab one from HF.

Thats exactly what I was looking at

. 20% off and a free flashlight.

SpudRider · 02-03-2016, 04:20 PM

I love Harbor Freight.

humanbeing · 02-03-2016, 07:53 PM

China is in https://en.wikipedia.org/wiki/Chunyun again. NO taobao/ aliexpresss ... for at least 2 weeks.

SpudRider · 02-03-2016, 09:11 PM

Thanks for posting the warning, HB.

Weldangrind · 02-04-2016, 10:47 AM

Thanks, HB. I forgot about that.

lemortede · 02-10-2016, 10:14 AM

So due to some of the breaches that have been discovered on TaoTao and AliExpress over the last week I think I would prefer to avoid them for the time being.
I think that right now my biggest challenge is that I still don't quite have a handle on what terms to use on Ebay to find the right parts for my bike.
Is there a more generic model that is more common for me to use in my key words?
Is CG150 going to give me the best matches on parts or do I still need to plan to measure size and bolt holes.

Weldangrind · 02-10-2016, 10:55 AM

Tell us exactly what you need. Perhaps we can help dig up the items.

lemortede · 02-10-2016, 05:51 PM

I am looking for 3 things right now.
1) Fuel cap. Its a locking.
The point that fits the hole is 38.6mm
The lock arms that come out is about 20mm down.

The pop out arms are not visible because they popped out when I had to drill the lock.
The hole in the tank is 39.7mm.

2)The front brake system, mainly the brake pump/master cylinder and brake line. The pump window is blown out.

The Brake line is 44 inches long, 111cm.

Just in case its a whole assembly the brake caliper looks like this.

The mounting holes are 59.3mm apart.

Thanks for your help on this. I am sorry to ask for more of it. I am still trying to get the hang of what fits this bike.

Followup. I need to note that humanbeing did link some gas caps but I am not sure which is the right one as some of the pages are pictures and not being translated.

lemortede · 02-11-2016, 12:49 AM

What do you think about
http://www.ebay.com/itm/HONDA-CB100-...0HmGPg&vxp=mtr

or

http://www.ebay.com/itm/Ignition-Swi...dVn~w0&vxp=mtr

humanbeing · 02-11-2016, 01:55 AM

NY stands for http://www.nanyangchina.com/ Big player in OEM market
===
CG type http://item.taobao.com/item.htm?id=520116217399
---
For 白菜 (XL125S) / CBT (CB125T)

Weldangrind · 02-11-2016, 10:46 AM

Humanbeing says the caliper is the same as Spud's Zong, so perhaps the master cylinder is as well. This is the caliper that Spud's bike uses (open in Google Chrome, and allow it to translate): http://world.taobao.com/item/3699259....lDo7bp#detail

Weldangrind · 02-11-2016, 10:49 AM

Quote:

Originally Posted by lemortede

What do you think about
http://www.ebay.com/itm/HONDA-CB100-...0HmGPg&vxp=mtr

or

http://www.ebay.com/itm/Ignition-Swi...dVn~w0&vxp=mtr

Perhaps the eBay seller will tell you the dimensions of the cap.

lemortede · 02-12-2016, 12:14 AM

Quote:

Originally Posted by humanbeing

NY stands for http://www.nanyangchina.com/ Big player in OEM market
===
CG type http://item.taobao.com/item.htm?id=520116217399
---
For 白菜 (XL125S) / CBT (CB125T)

That looks like my cap...at least before it got wrecked.
When I click your link it doesn't goto that gas cap though.
It goes to a non-locking one that may work?

I honestly feel like I am starting to waste the people on this boards time.
I almost feel like your pointing me at the parts but I am missing it some how.
When I try to search on Taobao I cant seem to narrow things down like the members of the board can.

I promise I am not trying to be dense....

Maybe I am spinning my wheels and I should just sell it on the local classifieds as is...I feel like if I spoke Mandarin this would be much easier.

humanbeing · 02-12-2016, 01:27 AM

Quote:

Originally Posted by lemortede

...if I spoke Mandarin this would be much easier...

"Speaking" is USELESS when searching... I don't speak (My oral fluently: Longdu btw 70% Hawaii Chinese's ancestor cames from that county ≥ Cantonese > Hokkien > Mandarin) or write https://en.wikipedia.org/wiki/Writte...acular_Chinese well either .
It's ALL about "skills" (For example u can tell what's the meaning 凹凸 https://en.wiktionary.org/wiki/%E5%87%B9%E5%87%B8 by 1st look). Paste the right keyword ("Sticky" in off-topic board had many tips...) is the main point then narrow it down by # of sales ...

lemortede · 02-12-2016, 01:28 AM

http://world.taobao.com/item/3914334....f1c2Et#detail
Can someone tell me if there are measurement specifications?
The Picture says 6,7 so I dont know if there are values somewhere on the page.

Edit. I need to clarify. Only part of the page will translate. The rest that I had to copy and paste into Google translate looks to be a terms or service statement.

02-03-2016, 04:20 PM	#17
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	I love Harbor Freight. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

02-03-2016, 07:53 PM	#18
humanbeing Join Date: Mar 2008 Posts: 2,436	China is in https://en.wikipedia.org/wiki/Chunyun again. NO taobao/ aliexpresss ... for at least 2 weeks. __________________
	1

02-03-2016, 09:11 PM	#19
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Thanks for posting the warning, HB. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

02-04-2016, 10:47 AM	#20
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Thanks, HB. I forgot about that. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

02-10-2016, 10:55 AM	#22
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Tell us exactly what you need. Perhaps we can help dig up the items. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

02-10-2016, 10:14 AM	#21
lemortede Join Date: Jan 2016 Posts: 23	So due to some of the breaches that have been discovered on TaoTao and AliExpress over the last week I think I would prefer to avoid them for the time being. I think that right now my biggest challenge is that I still don't quite have a handle on what terms to use on Ebay to find the right parts for my bike. Is there a more generic model that is more common for me to use in my key words? Is CG150 going to give me the best matches on parts or do I still need to plan to measure size and bolt holes.
	0

02-10-2016, 05:51 PM	#23
lemortede Join Date: Jan 2016 Posts: 23	I am looking for 3 things right now. 1) Fuel cap. Its a locking. The point that fits the hole is 38.6mm The lock arms that come out is about 20mm down. The pop out arms are not visible because they popped out when I had to drill the lock. The hole in the tank is 39.7mm. 2)The front brake system, mainly the brake pump/master cylinder and brake line. The pump window is blown out. The Brake line is 44 inches long, 111cm. Just in case its a whole assembly the brake caliper looks like this. The mounting holes are 59.3mm apart. Thanks for your help on this. I am sorry to ask for more of it. I am still trying to get the hang of what fits this bike. Followup. I need to note that humanbeing did link some gas caps but I am not sure which is the right one as some of the pages are pictures and not being translated. Last edited by lemortede; 02-10-2016 at 10:04 PM.
	0

02-11-2016, 12:49 AM	#24
lemortede Join Date: Jan 2016 Posts: 23	What do you think about http://www.ebay.com/itm/HONDA-CB100-...0HmGPg&vxp=mtr or http://www.ebay.com/itm/Ignition-Swi...dVn~w0&vxp=mtr
	0

02-11-2016, 01:55 AM	#25
humanbeing Join Date: Mar 2008 Posts: 2,436	NY stands for http://www.nanyangchina.com/ Big player in OEM market === CG type http://item.taobao.com/item.htm?id=520116217399 --- For 白菜 (XL125S) / CBT (CB125T) __________________ Last edited by humanbeing; 02-11-2016 at 06:37 PM.
	0

02-11-2016, 10:46 AM	#26
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Humanbeing says the caliper is the same as Spud's Zong, so perhaps the master cylinder is as well. This is the caliper that Spud's bike uses (open in Google Chrome, and allow it to translate): http://world.taobao.com/item/3699259....lDo7bp#detail __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

02-12-2016, 01:28 AM	#30
lemortede Join Date: Jan 2016 Posts: 23	http://world.taobao.com/item/3914334....f1c2Et#detail Can someone tell me if there are measurement specifications? The Picture says 6,7 so I dont know if there are values somewhere on the page. Edit. I need to clarify. Only part of the page will translate. The rest that I had to copy and paste into Google translate looks to be a terms or service statement. Last edited by lemortede; 02-12-2016 at 12:51 PM.
	0