Maxfine MXF 150-4N parts help - Page 3

humanbeing · 02-12-2016, 01:45 AM

Quote:

Originally Posted by lemortede

http://world.taobao.com/item/3914334....f1c2Et#detail
Can someone tell me if there are measurement specifications?
The Picture says 6,7 so I dont know if there are values somewhere on the page.

PM SpudRider. His "GY2" Sierra use those parts...

Weldangrind · 02-12-2016, 11:05 AM

Agreed. Spud would likely be happy to provide a measurement for you.

I hope that caliper and master are a match (and I think they are). The price is right.

SpudRider · 02-12-2016, 10:04 PM

Indeed, I am happy to measure the distance between the centers of the two bolts for my front brake caliper.

lemortede · 02-15-2016, 10:35 AM

So I set up an account with Taebaorends and am putting together my order.
Thanks for being patient and helping me figure out how to find parts for this thing.

Weldangrind · 02-15-2016, 11:18 AM

We all started at the same place, with China bikes being a mystery and a fascination.

lemortede · 02-15-2016, 02:38 PM

Anyone have any ideas on models with the same plastics?
It looks like the ZS200GY ones here.
http://world.taobao.com/item/2351185....VwlXGL#detail

If those were red I would take the chance.
I figure if im going to place the order I may as well order all the parts I will want.

humanbeing · 02-15-2016, 07:54 PM

"Mod" universal https://item.taobao.com/item.htm?id=9962920995 白菜 (http://club.autohome.com.cn/bbs/thre...8329329-1.html XL125S copy... ) on it ...

SpudRider · 02-16-2016, 01:49 AM

I was going to measure my caliper on Monday, but I forgot. I will try my best to remember to make the measurement tomorrow.

lemortede · 02-18-2016, 10:16 AM

Last night I was able to get the carb pulled apart and cleaned.
The bike started right up and runs great.
With that I am ready to dump some money into it.
As soon as I can get the caliper bolt spacing verified I can order my parts.
Thanks again for being willing to do that.

lemortede · 02-18-2016, 01:52 PM

I have been looking around on Taobao and can not find an airfilter.
Anyone have any suggestions on comparable models of should I just be looking domestically.
I also want to thank and apologize to humanbeing for their help. I feel like I may have been a little dismissive when I started in to this. To be honest, at first I wasn't sure they were helping me much, but in reality once you get a handle on Taobao they were extremely helpful.

lemortede · 02-18-2016, 05:09 PM

I am pretty sure that Google Translate is mis translating this.
所有宝贝
On some of my searches it says "could not find anything in Baby" and on the WieDong it says "All Baby" when it found stuff. What does it actually translate too....

SpudRider · 02-18-2016, 07:32 PM

Quote:

Originally Posted by lemortede

Last night I was able to get the carb pulled apart and cleaned.
The bike started right up and runs great.
With that I am ready to dump some money into it.
As soon as I can get the caliper bolt spacing verified I can order my parts.
Thanks again for being willing to do that.

I measured my front caliper yesterday. The distance between the centers of the caliper bolts is 60 millimeters.

lemortede · 02-18-2016, 09:46 PM

Quote:

Originally Posted by SpudRider

I measured my front caliper yesterday. The distance between the centers of the caliper bolts is 60 millimeters.

Thankyou. That is exactly what I needed.
That looks like the right part.

lemortede · 02-18-2016, 10:43 PM

Well Wish me luck. I just placed my order.
Just out of Curiosity, what shipping have you used?
I selected what I knew, fedex or dhl, but is the EMS any good international?

SpudRider · 02-19-2016, 04:39 PM

Quote:

Originally Posted by lemortede

Well Wish me luck. I just placed my order.
Just out of Curiosity, what shipping have you used?
I selected what I knew, fedex or dhl, but is the EMS any good international?

EMS or DHL is likely to be the least expensive. When the agent receives your parts, ask for photographs to verify the parts are correct. After you verify the parts, tell the agent to ship the parts using the least expensive method.

02-12-2016, 11:05 AM	#32
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Agreed. Spud would likely be happy to provide a measurement for you. I hope that caliper and master are a match (and I think they are). The price is right. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

02-12-2016, 10:04 PM	#33
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Indeed, I am happy to measure the distance between the centers of the two bolts for my front brake caliper. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

02-15-2016, 11:18 AM	#35
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	We all started at the same place, with China bikes being a mystery and a fascination. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

02-15-2016, 07:54 PM	#37
humanbeing Join Date: Mar 2008 Posts: 2,436	"Mod" universal https://item.taobao.com/item.htm?id=9962920995 白菜 (http://club.autohome.com.cn/bbs/thre...8329329-1.html XL125S copy... ) on it ... __________________ Last edited by humanbeing; 02-15-2016 at 08:28 PM.
	0

02-16-2016, 01:49 AM	#38
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	I was going to measure my caliper on Monday, but I forgot. I will try my best to remember to make the measurement tomorrow. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

02-15-2016, 10:35 AM	#34
lemortede Join Date: Jan 2016 Posts: 23	So I set up an account with Taebaorends and am putting together my order. Thanks for being patient and helping me figure out how to find parts for this thing.
	0

02-15-2016, 02:38 PM	#36
lemortede Join Date: Jan 2016 Posts: 23	Anyone have any ideas on models with the same plastics? It looks like the ZS200GY ones here. http://world.taobao.com/item/2351185....VwlXGL#detail If those were red I would take the chance. I figure if im going to place the order I may as well order all the parts I will want.
	0

02-18-2016, 10:16 AM	#39
lemortede Join Date: Jan 2016 Posts: 23	Last night I was able to get the carb pulled apart and cleaned. The bike started right up and runs great. With that I am ready to dump some money into it. As soon as I can get the caliper bolt spacing verified I can order my parts. Thanks again for being willing to do that.
	0

02-18-2016, 01:52 PM	#40
lemortede Join Date: Jan 2016 Posts: 23	I have been looking around on Taobao and can not find an airfilter. Anyone have any suggestions on comparable models of should I just be looking domestically. I also want to thank and apologize to humanbeing for their help. I feel like I may have been a little dismissive when I started in to this. To be honest, at first I wasn't sure they were helping me much, but in reality once you get a handle on Taobao they were extremely helpful.
	0

02-18-2016, 05:09 PM	#41
lemortede Join Date: Jan 2016 Posts: 23	I am pretty sure that Google Translate is mis translating this. 所有宝贝 On some of my searches it says "could not find anything in Baby" and on the WieDong it says "All Baby" when it found stuff. What does it actually translate too....
	0

02-18-2016, 10:43 PM	#44
lemortede Join Date: Jan 2016 Posts: 23	Well Wish me luck. I just placed my order. Just out of Curiosity, what shipping have you used? I selected what I knew, fedex or dhl, but is the EMS any good international?
	0