Dong Fang DF250RTG - Page 34

Barnone · 07-31-2020, 06:44 AM

Quote:

Originally Posted by chhst30

If only you were closer to philly, I would take it off your hands.

Robbinsville NC to Philadelphia PA
10 h 48 min (700.5 mi) via I-81 N
Yep, long drive.
Meet you with the bike in Asheville,NC.
I bring the bike and title , you bring $900 cash.

KyzoSoupz · 08-11-2020, 10:03 PM

Check this out, I fount an 18t sprocket for the DF250RTG
I have no clue if the counter shaft is 17mm or 20mm but they have an 18t front sprocket in both 17mm and 20mm.
I'll get back to yall when I measure my counter shaft with my caliper measure, here is the link to the sprocket.
It will work with the vennom x22

https://www.ebay.com/itm/For-428-Cha...kAAOSw5T1c-AoY

Mister104 · 08-11-2020, 10:22 PM

Quote:

Originally Posted by KyzoSoupz

Check this out, I fount an 18t sprocket for the DF250RTG
I have no clue if the counter shaft is 17mm or 20mm but they have an 18t front sprocket in both 17mm and 20mm.
I'll get back to yall when I measure my counter shaft with my caliper measure, here is the link to the sprocket.
It will work with the vennom x22

https://www.ebay.com/itm/For-428-Cha...kAAOSw5T1c-AoY

I bought one to try, I'll let you know my thoughts after i take it out.

KyzoSoupz · 08-12-2020, 01:17 AM

Quote:

Originally Posted by Mister104

I bought one to try, I'll let you know my thoughts after i take it out.

Wait, you already have one? Yo what's the size of the Coundershaft. That will save me from having to remove the sprocket cover. I dont really feel like removing it.

KyzoSoupz · 08-12-2020, 01:40 AM

Well, hell...... I have been waiting to say something but ehh...... I have had these lights for about weeks now.
Rear brake light was unsuccessful because of the brightness. The phone is fooling you trust me....... it has a shitty camera. The rear brake light is impossible to see when the sun is directly on it. On the other hand the fork turn signals are a success, they are very very bright. Even with the sun directly on it.
So I purchased a new all in one motorcycle LED brake light strip and unfortunately came in broken in the mail.... I tested it anyways, it brighter but not as bright as SMD-LED's like my fork signals. Unless you make a sun visor for the light.... trust me if you did that people will se the light. So my plans later is makeshift a sun visor out of a black container lid. Lets get creative shall we?
Links to items if interested.

Fork turn signals
http://vi.raptor.ebaydesc.com/ws/eBa...=0&cspheader=1

This is the company I went with sence revival cycles has a crappy shipping service. This is the origanal company of the light that is broken. They have faster shipping if your willing to spend more.
https://www.radiantz.com/Turns-and-B.../470x-xxxx.htm

Name: 20200812_011809.jpg
Views: 932
Size: 79.0 KB

Name: 20200812_011809.jpg
Views: 932
Size: 79.0 KB

Name: 20200812_011903.jpg
Views: 911
Size: 86.6 KB

Name: 20200812_011955.jpg
Views: 889
Size: 81.7 KB

Name: 20200811_015616.jpg
Views: 911
Size: 76.4 KB

franque · 08-12-2020, 05:08 AM

Just so you guys know, the 18t sprockets don't generally fit on the clone motors without lots of grinding, perhaps into an oil passage or two.

KyzoSoupz · 08-12-2020, 06:53 AM

Quote:

Originally Posted by franque

Just so you guys know, the 18t sprockets don't generally fit on the clone motors without lots of grinding, perhaps into an oil passage or two.

Wait, you didn't measure your counter shaft? They have a 17mm and 20mm....... alright I'm gonna measure my counter shaft......

KyzoSoupz · 08-12-2020, 07:10 AM

Countershaft is 20mm.
Name: 20200812_070843.jpg
Views: 942
Size: 94.6 KB

KyzoSoupz · 08-12-2020, 07:14 AM

Garunteed to fit, I'm ordering one. 20mm hole, 6 teeth for the countershaft

https://www.ebay.com/itm/428-18T-20m...AAAOxy86RSVQ4G

**JerryHawk250** · 08-12-2020, 07:25 AM

Quote:

Originally Posted by KyzoSoupz

Garunteed to fit, I'm ordering one. 20mm hole, 6 teeth for the countershaft

https://www.ebay.com/itm/428-18T-20m...AAAOxy86RSVQ4G

The JTF259 Sprockets will fit. https://www.amazon.com/JT-Sprockets-...2PHMFQ8N5GK388

Barnone · 08-12-2020, 07:47 AM

The DF comes with a 17 tooth front sprocket. Not sure a 18 will fit. I put a smaller rear sprocket on mine.
https://www.amazon.com/exec/obidos/A...im/refuge08-20

My DF is still for sale.

franque · 08-12-2020, 08:30 AM

It's a reflection of the outside diameter of the sprocket with the chain installed, and clearance thereof. 18t front sprockets generally don't fit without grinding the case. I wasn't talking about the countershaft, the ID of the splines don't change with tooth count.

Barnone · 08-12-2020, 09:12 AM

^^^^^
That is why I went with a smaller rear sprocket to increase the gearing which works just fine on my DF here in the mountains of Western North Carolina.

KyzoSoupz · 08-16-2020, 04:33 PM

Here are the lights I purchased.

Forklights, extremely bright:
https://www.ebay.com/itm/1-Pair-Brig...id=21022799631

All in one tail lights, very bright. You may need too makeshift a sun visor to keep the sunlight out of the tail lights so people can see them but trust me, they will see them:
https://www.radiantz.com/Turns-and-B.../470x-xxxx.htm

Barnone · 08-16-2020, 05:35 PM

I sold my DF today so am down to the scooter and the TU250X.

08-11-2020, 10:03 PM	#497
KyzoSoupz Join Date: Mar 2020 Location: GA Posts: 82	Check this out, I fount an 18t sprocket for the DF250RTG I have no clue if the counter shaft is 17mm or 20mm but they have an 18t front sprocket in both 17mm and 20mm. I'll get back to yall when I measure my counter shaft with my caliper measure, here is the link to the sprocket. It will work with the vennom x22 https://www.ebay.com/itm/For-428-Cha...kAAOSw5T1c-AoY
	0

08-12-2020, 01:40 AM	#500
KyzoSoupz Join Date: Mar 2020 Location: GA Posts: 82	Well, hell...... I have been waiting to say something but ehh...... I have had these lights for about weeks now. Rear brake light was unsuccessful because of the brightness. The phone is fooling you trust me....... it has a shitty camera. The rear brake light is impossible to see when the sun is directly on it. On the other hand the fork turn signals are a success, they are very very bright. Even with the sun directly on it. So I purchased a new all in one motorcycle LED brake light strip and unfortunately came in broken in the mail.... I tested it anyways, it brighter but not as bright as SMD-LED's like my fork signals. Unless you make a sun visor for the light.... trust me if you did that people will se the light. So my plans later is makeshift a sun visor out of a black container lid. Lets get creative shall we? Links to items if interested. Fork turn signals http://vi.raptor.ebaydesc.com/ws/eBa...=0&cspheader=1 This is the company I went with sence revival cycles has a crappy shipping service. This is the origanal company of the light that is broken. They have faster shipping if your willing to spend more. https://www.radiantz.com/Turns-and-B.../470x-xxxx.htm
	0

08-12-2020, 05:08 AM	#501
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	Just so you guys know, the 18t sprockets don't generally fit on the clone motors without lots of grinding, perhaps into an oil passage or two.
	1

08-12-2020, 07:10 AM	#503
KyzoSoupz Join Date: Mar 2020 Location: GA Posts: 82	Countershaft is 20mm.
	1

08-12-2020, 07:14 AM	#504
KyzoSoupz Join Date: Mar 2020 Location: GA Posts: 82	Garunteed to fit, I'm ordering one. 20mm hole, 6 teeth for the countershaft https://www.ebay.com/itm/428-18T-20m...AAAOxy86RSVQ4G
	0

08-12-2020, 07:47 AM	#506
Barnone Join Date: Feb 2007 Posts: 1,348	The DF comes with a 17 tooth front sprocket. Not sure a 18 will fit. I put a smaller rear sprocket on mine. https://www.amazon.com/exec/obidos/A...im/refuge08-20 My DF is still for sale.
	0

08-12-2020, 08:30 AM	#507
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	It's a reflection of the outside diameter of the sprocket with the chain installed, and clearance thereof. 18t front sprockets generally don't fit without grinding the case. I wasn't talking about the countershaft, the ID of the splines don't change with tooth count.
	1

08-16-2020, 04:33 PM	#509
KyzoSoupz Join Date: Mar 2020 Location: GA Posts: 82	Here are the lights I purchased. Forklights, extremely bright: https://www.ebay.com/itm/1-Pair-Brig...id=21022799631 All in one tail lights, very bright. You may need too makeshift a sun visor to keep the sunlight out of the tail lights so people can see them but trust me, they will see them: https://www.radiantz.com/Turns-and-B.../470x-xxxx.htm
	0

08-16-2020, 05:35 PM	#510
Barnone Join Date: Feb 2007 Posts: 1,348	I sold my DF today so am down to the scooter and the TU250X.
	0