Rhino and Mikuni carb

jrs · 08-25-2016, 03:45 PM

Quote:

Originally Posted by 2LZ

I have that carb on my Rhino with no issues. Check your cable routing all the way up and then take the thumb throttle apart and make sure it's set up correctly. It should fit.

I was surprised by the complication as well because of your success and others as well. Everything looks good with the cable. Im starting a stretch of work where I will be working a ton of hours so I wont have much time but I will update when I figure it out

jrs · 08-30-2016, 04:42 PM

Just to update no matter what i did I could not get the carb to work without cutting a 1/4 inch off to expose more cable in the rest position. It did work and my rhino is running better then ever. I do strongly recommend this for anyone with a sealed unit who feels their machine is not performing at its peak. She pulls hard all the way to red line now and gets a little squirrley stabbing the throttle from lifting the front up and unloading the suspension. I used 2LZ (I think I got the name right) jet recommendation and it seems to be performing well.

08-30-2016, 04:42 PM	#2
jrs Join Date: Aug 2016 Location: Stormville, NY Posts: 17	Just to update no matter what i did I could not get the carb to work without cutting a 1/4 inch off to expose more cable in the rest position. It did work and my rhino is running better then ever. I do strongly recommend this for anyone with a sealed unit who feels their machine is not performing at its peak. She pulls hard all the way to red line now and gets a little squirrley stabbing the throttle from lifting the front up and unloading the suspension. I used 2LZ (I think I got the name right) jet recommendation and it seems to be performing well.
	2