TT250 49 tooth sprocket from CSC

Ghaniba · 10-17-2016, 10:43 AM

Or, I could just simply answer directly and help, here.

So, the original sprocket is convex OUT to the hub. For my swap, I did simply flip the stock sprocket flip to face the hub, and bolted the new sprocket to that dish portion. It worked awesome.

Now, for the concerns of the exact in line presence of the chain -- Have you guys fiddled with the front sprocket? That little bastard has a lot of play already. I wouldn't be too concerned over the 1mm difference, especially when you consider how cheap all of these parts are anyway...

In any event, I'll be swapping my 43 with a 45 for experimentation. It's on order claiming it'll be in next week... we'll see if my order for this one gets canceled again like the last vendor.

Dave aka Ghaniba

10-17-2016, 10:43 AM	#9
Ghaniba Join Date: Apr 2016 Location: Northeast CT Posts: 46	Or, I could just simply answer directly and help, here. So, the original sprocket is convex OUT to the hub. For my swap, I did simply flip the stock sprocket flip to face the hub, and bolted the new sprocket to that dish portion. It worked awesome. Now, for the concerns of the exact in line presence of the chain -- Have you guys fiddled with the front sprocket? That little bastard has a lot of play already. I wouldn't be too concerned over the 1mm difference, especially when you consider how cheap all of these parts are anyway... In any event, I'll be swapping my 43 with a 45 for experimentation. It's on order claiming it'll be in next week... we'll see if my order for this one gets canceled again like the last vendor. Dave aka Ghaniba __________________ __________________________________________________ __________________________ Motovlog: http://youtube.com/ghaniba -- CSC RX-3, CSC TT250, BMW R12GS, R850R, XS650
	1