Taotao Rhino 250 valve lash specs

mrboo · 04-05-2019, 08:58 PM

Title says it all what is the spec for valve lash on the rhino this is a 2013 rhino if that matters or not, thanks in advance

Mudflap · 04-06-2019, 07:23 AM

I believe most people set them at .003" and .004". I set .002" for both which is what the Lifan CG manual says.

mrboo · 04-06-2019, 08:50 PM

thanks

jwg3bird · 10-26-2020, 12:32 PM

Hi there ,
I’m still searching for a taotaorhino 250 service manual.
Does anybody know where I can get my hands on one, or another model that uses the same engine?
I have replaced The clutch but I’m getting no resistance when I manually try to move lever on side of crank case. Is seems like I’ve forgotten to replace a spacer to bring out the clutch plates to meet the pin that engages the clutch.
Has anyone run into this problem?

jwg3bird · 10-26-2020, 12:34 PM

Or have access to the service manual so I can retrace my steps????
Thank you ,
John.

Mudflap · 10-26-2020, 01:46 PM

Do a search for a factory service manual for a Honda CG125.

Mudflap · 10-26-2020, 02:02 PM

storm-english-62ktjam5.pdf

This is the one I downloaded several years ago. If there is a place to upload it to this site I'll be glad to do it. It's about 8.5 megs.

Darth Racer · 10-26-2020, 05:14 PM

https://josemaco.files.wordpress.com...h-62ktjam5.pdf

When I searched for the PDF name it actually pointed to a thread here at China Riders, with the link.

That manual states 0.003 +/- 0.001 for exhaust and intake.

franque · 10-26-2020, 07:50 PM

Quote:

Originally Posted by jwg3bird

Hi there ,
I’m still searching for a taotaorhino 250 service manual.
Does anybody know where I can get my hands on one, or another model that uses the same engine?
I have replaced The clutch but I’m getting no resistance when I manually try to move lever on side of crank case. Is seems like I’ve forgotten to replace a spacer to bring out the clutch plates to meet the pin that engages the clutch.
Has anyone run into this problem?

Make sure you took the bearing and metal piece that connects to the pushrod from the old pressure plate (the part with 4, 5, or 6 bolts on the clutch) and install it.

04-05-2019, 08:58 PM	#1
mrboo Join Date: Apr 2019 Posts: 4	Taotao Rhino 250 valve lash specs Title says it all what is the spec for valve lash on the rhino this is a 2013 rhino if that matters or not, thanks in advance
	0

04-06-2019, 07:23 AM	#2
Mudflap Join Date: Sep 2014 Posts: 1,870	I believe most people set them at .003" and .004". I set .002" for both which is what the Lifan CG manual says.
	0

04-06-2019, 08:50 PM	#3
mrboo Join Date: Apr 2019 Posts: 4	thanks
	0

10-26-2020, 12:32 PM	#4
jwg3bird Join Date: Sep 2020 Posts: 6	Hi there , I’m still searching for a taotaorhino 250 service manual. Does anybody know where I can get my hands on one, or another model that uses the same engine? I have replaced The clutch but I’m getting no resistance when I manually try to move lever on side of crank case. Is seems like I’ve forgotten to replace a spacer to bring out the clutch plates to meet the pin that engages the clutch. Has anyone run into this problem?
	0

10-26-2020, 12:34 PM	#5
jwg3bird Join Date: Sep 2020 Posts: 6	Or have access to the service manual so I can retrace my steps???? Thank you , John.
	0

10-26-2020, 01:46 PM	#6
Mudflap Join Date: Sep 2014 Posts: 1,870	Do a search for a factory service manual for a Honda CG125.
	0

10-26-2020, 02:02 PM	#7
Mudflap Join Date: Sep 2014 Posts: 1,870	storm-english-62ktjam5.pdf This is the one I downloaded several years ago. If there is a place to upload it to this site I'll be glad to do it. It's about 8.5 megs.
	0

10-26-2020, 05:14 PM	#8
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	https://josemaco.files.wordpress.com...h-62ktjam5.pdf When I searched for the PDF name it actually pointed to a thread here at China Riders, with the link. That manual states 0.003 +/- 0.001 for exhaust and intake.
	0