Information

Ethan capps · 03-13-2020, 07:40 PM

I've got the taotao 250 tbr7 got a pinging sound coming from the engine was wondering if it could be a bent push rod and if so where I could possibly get one

Its_not_a_honda · 03-13-2020, 09:25 PM

Just adjust the valves.......

AcidAngel7 · 03-18-2020, 09:38 PM

A valve adjustment should do the trick. bring it to top dead center, there are marks on the flywheel that should tell you where it is if you remove the inspection caps. Its a stamped letter T. feeler gauge needed is a .050

a link on how to do it.

:AA:

View Poll Results: I've got a Tao Tao 250 tbr7 got a pinging noise in the motor
Where can I find push rods	0	0%
How do I replace push rods	1	100.00%
Voters: 1. You may not vote on this poll

03-13-2020, 07:40 PM	#1
Ethan capps Join Date: Mar 2020 Posts: 1	Information I've got the taotao 250 tbr7 got a pinging sound coming from the engine was wondering if it could be a bent push rod and if so where I could possibly get one
	0

03-13-2020, 09:25 PM	#2
Its_not_a_honda Join Date: Jan 2018 Posts: 410	Just adjust the valves....... __________________ 2020 Kawasaki KLX300R, 2018 Yamaha TW200 If you want more of something, tax it less. If you want less of something, tax it more.
	0

03-18-2020, 09:38 PM	#3
AcidAngel7 Join Date: Mar 2020 Location: Whittier, CA. Posts: 6	A valve adjustment should do the trick. bring it to top dead center, there are marks on the flywheel that should tell you where it is if you remove the inspection caps. Its a stamped letter T. feeler gauge needed is a .050 a link on how to do it. :AA:
	0