X1000 CG 150 / Jincheng JC150

b3n · 04-14-2023, 06:19 PM

It took me a long time to make some progress with this project, as parts need to be substituted with equivalents from similar bikes.

Luckily most of the parts I could find on ebay. Just about everything was bent or broken to some degree.

Foot pegs, handlebars, triple trees, front wheel bent, and so on. Still missing a bunch of things, but we're getting there slowly.

I rode it around a bit, it's geared super low and feels very torquey for a 150cc. I actually started in 2nd a couple of times without realizing it. This also means it isn't very fast, I'd be surprised if it could do more than 50-55 MPH.
Here's a short walkaround clip.

04-14-2023, 06:19 PM	#1
b3n Join Date: Dec 2022 Location: NH Posts: 10	It took me a long time to make some progress with this project, as parts need to be substituted with equivalents from similar bikes. Luckily most of the parts I could find on ebay. Just about everything was bent or broken to some degree. Foot pegs, handlebars, triple trees, front wheel bent, and so on. Still missing a bunch of things, but we're getting there slowly. I rode it around a bit, it's geared super low and feels very torquey for a 150cc. I actually started in 2nd a couple of times without realizing it. This also means it isn't very fast, I'd be surprised if it could do more than 50-55 MPH. Here's a short walkaround clip.
	0