05-14-2016, 01:22 AM
|
#1 |
|
Join Date: May 2007
Location: Lac Du Flambeau, WI
Posts: 804
|
Hawk Tach Cluster Reviews.......
As someone suggested, here is a new thread to review the Hawk Tach Cluster. 8 of y'all on the early order should be seeing them in your mailbox tomorrow. Let's hear your thoughts & ideas!! All boxes have instructions in the bottom under the packing material. Their is also a quick video here:
I will also be available tomorrow for phone support if needed. Phone # is on the instruction sheet. Thanks!!
|
|
|
05-14-2016, 05:36 PM
|
#5 |
|
Join Date: Mar 2016
Posts: 46
|
Ok initial review the cluster is awesome, got it installed and working in about 20 minutes "had" a video but my helmet cam fogged so the footage is crap. But from the ride i can say that the cluster is dead on (once switched to 19") and works perfect. Once it warms up tommorow i'll take the bike out again and get a better video and a few pictures but otherwise I have no complaints about the product at all.
|
|
|
|
05-14-2016, 06:31 PM
|
#6 | |
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
|
Quote:
 Cool, and remember when riding, heads up!
__________________
***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
|
|
|
|
|
05-14-2016, 06:31 PM
|
#7 | |
|
Join Date: May 2007
Location: Lac Du Flambeau, WI
Posts: 804
|
Quote:
Good to hear! I assume you where not missing a tap splice? And what's this "warm up" your talking about? It's 65* here in Northwest Montana! |
|
|
|
|
05-14-2016, 08:25 PM
|
#9 |
|
Join Date: Mar 2016
Posts: 46
|
yes head stays up camera is pointed down, and yea freak temp drop in hellinois it got down to 40 today
for those interested this is the video it blurs up at about the 5 minute mark |
|
|
|
05-14-2016, 10:02 PM
|
#10 | |
|
Join Date: May 2007
Location: Lac Du Flambeau, WI
Posts: 804
|
Quote:
|
|
|
|
|
05-14-2016, 10:17 PM
|
#11 | |
|
Join Date: Mar 2016
Posts: 46
|
Quote:
|
|
|
|
|
05-14-2016, 10:35 PM
|
#12 |
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
|
Well done MJ ......that makes a good bike even better!
__________________
************************************************** *** " Time you enjoy wasting, is not wasted." - John Lennon  “I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.” ― Thomas Jefferson "If you don't know where you're going any road will take you there" ....George Harrison song |
|
|
|
05-15-2016, 11:18 AM
|
#13 |
|
Join Date: May 2007
Location: Lac Du Flambeau, WI
Posts: 804
|
OK, After watching popeicus86 & motocheez's videos, I see the clusters are SLIGHTLY tilted. Mine was too and i thought it was my bracket but it looks as if it might be in the mold used to make the cluster. What i did is loosen the mounting bolts and stick 2 lock washers under the Port side of the bracket shown in this photo. The cluster is now level.....
|
|
|
|
05-15-2016, 12:18 PM
|
#14 | |
|
Join Date: Sep 2015
Posts: 436
|
Quote:
|
|
|
|
|
05-15-2016, 05:02 PM
|
#15 |
|
Join Date: May 2016
Posts: 583
|
chuck is right, even the original cluster is tilted.
|
|
|
|
|
|
 |
|
|
Linear Mode
