Go Back   ChinaRiders Forums > Technical/Performance > Adventure Bikes > Zongshen RX3
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 09-17-2015, 09:14 PM   #1
peperino   peperino is offline
 
Join Date: Aug 2015
Location: Buenos Aires, Argentina
Posts: 135
Exhaust too loud

Hi gentlemen, hope you are having a great time!

Today I wanted to ask you if you know a cheap way to make the exhaust quieter. The Triax 250 (as it's known here in Argentina) has a unrestricted, loud exhaust. It gets tiresome after long rides.

I've been talking with some mechanic and they say they can make a custom, quieter exhaust. And expensive. So I'm looking for a cheaper, easier solution.

Here's what it looks like inside. I wonder if the USA version has something else to make it quieter that this one doesn't.

http://imgur.com/nvjabx3

Thank you!


 
Reply With Quote
Old 09-17-2015, 10:11 PM   #2
Huck369   Huck369 is offline
 
Huck369's Avatar
 
Join Date: Apr 2008
Location: Somerset, KY
Posts: 686
A lot of the noise of the RX-3 comes from the air box, not just the exhaust....

But a Supertrapp muffler is tuneable, so you could fit one of those to it.....or cheaper to buy some ear plugs
__________________
Huck
2013 Honda NC700X
2013 Moto Guzzi V7 Stone
2016 AJP PR4
2022 Templar X 250
2021 Sondors Metacycle
AMA Life Member


 
Reply With Quote
Old 09-17-2015, 10:34 PM   #3
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
You should be able to buy a universal muffler insert which will quiet the exhaust. I am unfamiliar with the current models, but you can probably find one if you search the internet.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 09-17-2015, 10:50 PM   #4
jct842   jct842 is offline
 
Join Date: Jan 2015
Location: arkansas
Posts: 297
When I took the test on a greeves 250 wearing an expansion chamber I stuffed it with course steel wool. Was about the last year off-road bikes came with titles around 1968. Ran like crap and after tested it blew out!


 
Reply With Quote
Old 09-17-2015, 10:53 PM   #5
peperino   peperino is offline
 
Join Date: Aug 2015
Location: Buenos Aires, Argentina
Posts: 135
Unfortunately here we don't have many choices as ebay, etc. Also, people here tend to do the opposite, make MORE noise. :(

Would someone be so kind of taking a picture just like the one I took in my OP so I can compare what's the difference between the model sold in usa and argentina? Maybe with that picture I can ask a mechanic for a cheaper alternative.

Thank you


 
Reply With Quote
Old 09-17-2015, 11:06 PM   #6
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
You can reduce exhaust noise by inserting a pipe of smaller diameter into the muffler outlet. I suggest you measure the inside diameter of the muffler outlet. You can then insert a piece of copper pipe, et cetera, which is smaller in diameter, and bolt, or screw it in place. The smaller pipe will definitely reduce the exhaust noise.

Please post more photographs of your muffler, and your entire exhaust system.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 09-17-2015, 11:34 PM   #7
peperino   peperino is offline
 
Join Date: Aug 2015
Location: Buenos Aires, Argentina
Posts: 135
That would be great. And if one could do it with cheap stuff from a hardware store, would be fantastic.

Here are some more pics of the exhaust. If you have the time, please show me yours.

http://imgur.com/a/a1DOG

Thank you!


 
Reply With Quote
Old 09-17-2015, 11:42 PM   #8
AZRider   AZRider is offline
 
Join Date: Jan 2015
Location: Phoenix, AZ
Posts: 267
Try removing the end cap, you may find that you can stuff more insulation in the baffle.
__________________
George

2016 CanAm Spyder F3-L


 
Reply With Quote
Old 09-17-2015, 11:47 PM   #9
peperino   peperino is offline
 
Join Date: Aug 2015
Location: Buenos Aires, Argentina
Posts: 135
So, remove rivets, check for room for more packing material, if so stuff some more, replace rivets, try ?


 
Reply With Quote
Old 09-17-2015, 11:56 PM   #10
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Quote:
Originally Posted by peperino View Post
That would be great. And if one could do it with cheap stuff from a hardware store, would be fantastic.

Here are some more pics of the exhaust. If you have the time, please show me yours.

http://imgur.com/a/a1DOG

Thank you!
You're welcome.

I looked at your photographs. You have the same exhaust system we have in the United States. I'm sure you can reduce exhaust noise by following the advice I posted earlier.

If you drill out the rivets, you can remove the end cap of the muffler. Then you will be able to insert, and fasten, a smaller diameter pipe in the muffler outlet. Finally, you can replace the end cap, and install new rivets.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 09-18-2015, 12:00 AM   #11
peperino   peperino is offline
 
Join Date: Aug 2015
Location: Buenos Aires, Argentina
Posts: 135
Awesome. It is the same? It is clearly making more noise than the one I hear in this video at the 2 min mark.



I'll can try the pipe thing. Is there something I could look for on a hardware store?


 
Reply With Quote
Old 09-18-2015, 12:06 AM   #12
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Quote:
Originally Posted by peperino View Post
Awesome. It is the same? It is clearly making more noise than the one I hear in this.

I'll can try the pipe thing. Is there something I could look for on a hardware store?
Yes, your exhaust system is exactly the same as mine. The bike in that video has a different exhaust header, which was later changed.

Measure the inside diameter of the muffler outlet. Then search the hardware store for a smaller pipe, made of any metal, which will fit inside.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 09-18-2015, 12:08 AM   #13
peperino   peperino is offline
 
Join Date: Aug 2015
Location: Buenos Aires, Argentina
Posts: 135
Alright.
I'll record a video of mine tomorrow so you can hear it. I'm pretty sure it sounds louder than the one in the video.

Thanks !!!


 
Reply With Quote
Old 09-18-2015, 07:39 AM   #14
Huck369   Huck369 is offline
 
Huck369's Avatar
 
Join Date: Apr 2008
Location: Somerset, KY
Posts: 686
Of my 3 street legal motorcycles, the exhaust on the RX-3 is the loudest, butI don't consider it excessively loud(and I am NOT a fan of loud bikes), but it IS louder than either my XT250, or my NC700X (The NC is crazy quite! )
__________________
Huck
2013 Honda NC700X
2013 Moto Guzzi V7 Stone
2016 AJP PR4
2022 Templar X 250
2021 Sondors Metacycle
AMA Life Member


 
Reply With Quote
Old 09-18-2015, 09:12 AM   #15
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
I guess my hearing is compromised. The exhaust sounds just right to me.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:08 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.