04-09-2024, 09:08 AM | #1 |
Join Date: May 2023
Posts: 17
|
Where to put oil return port on Zongshen 200
Disregard.
|
|
04-09-2024, 09:16 AM | #2 |
Join Date: Feb 2024
Location: SW Missouri
Posts: 192
|
That nut covers the screen for the oil "filter"
I'd almost be tempted to have a new oil fill cap machined up with a port so you can run the gravity drain line from your turbo in there.
__________________
---------- 2023 Templar X 2009 Triumph Bonneville 1976 Yamaha DT175 1974 Honda MT125 |
|
04-09-2024, 05:03 PM | #4 |
Join Date: Feb 2009
Location: Michigan
Posts: 1,043
|
The one on the side isn't considered a drain as it doesn't completely drain the oil out of the engine. It's called the filter cover. The actual drain is under the engine. In the above video, they should have drained the oil out of the bottom first. This would have taken the swarf and sludge out with the fast flowing oil. Then the side cover should've been removed to access the filter screen for cleaning.
__________________
2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D |
|
|
|
|
|