New Zongshen RX3 (ZS250GY-3) Dual Sport

[SpudRider]

Originally Posted by AZRider

I wasn't able to get my fingers behind the windshield to hold the nut, so I used a pair of needle nose pliers to hold the nut and then got the bolt started finger tight.

Thanks for posting the good tip.

I made the mistake of installing the lowest bolts last, instead of first. I couldn't use needle nose pliers, or even a pair of tweezers to hold the nuts. Therefore, I had to resort to using a telescoping magnet to hold the nuts to get them started.

http://www.harborfreight.com/18-inch...net-37187.html

Install the lowest bolts of the windshield first.