anthonyfa18's gy6 carb on beast 200cc and updats

[anthonyfa18]

Originally Posted by FastDoc

It is simply threaded on like a nut. You may be able to unscrew it with your fingers, or use a small pair of pliers. I'd replace the plug if you have it already. The Chinese plugs can cause some odd problems that are difficult to diagnose.

i did replace my spark plug i am running a ngk iridium xi dpr8eix-9 it is amazing

[anthonyfa18]

hey fastdoc i try what u said but my ngk iridium xi dpr8eix-9 sprkplug douse not come apart like u said.

[FastDoc]

Sorry about that. It could be not all plugs are the same way. We tried.

[anthonyfa18]

it ok i will just keep it the way it is. it runs good, it runs like a real beast :twisted: :twisted:

[anthonyfa18]

:twisted:UPDATE:twisted:

look on page 2 remember my carbon 125cc exhaust, well here are my test fit photo



Uploaded with ImageShack.us



Uploaded with ImageShack.us

remember this is just a test fit, i will be removing the claps and welding it, and yess it sound sick sound clip is coming soon :twisted: :twisted:

[TurboT]

It does look cool, I'll give it that.

I destroyed a 125cc muffler on my Beast, so make sure you have sufficient breathing and flow there or you'll be refab'ing another muffler soon.

[anthonyfa18]

Originally Posted by TurboT

It does look cool, I'll give it that.

I destroyed a 125cc muffler on my Beast, so make sure you have sufficient breathing and flow there or you'll be refab'ing another muffler soon.

here is the link if u want one

http://cgi.ebay.ca/Big-Bore-Carbon-F...item230650bd15

[TurboT]

Originally Posted by anthonyfa18

here is the link if u want one

http://cgi.ebay.ca/Big-Bore-Carbon-F...item230650bd15

Thanks for the link. I have a Monster muffler on now and it sounds cool so I'll leave it for a bit.

Let us know if yours lives, as my 125cc muffler came off in three pieces on the trail on the 2nd ride.

[anthonyfa18]

here is a sound clip remember this is a test fit so there is some leaks.



recap on mod list
-gy6 carb
-uni filter
-performance cdi
-ngk iridium spark plugs
-performance coil pack and wire

have fun :twisted: :twisted: :twisted: :twisted: :twisted: :twisted:

[SpudRider]

You did a great job, Anthony! Thank you for the superb video, and photos. The Acewell computer looks great on your Gio Beast.

Spud

[anthonyfa18]

Originally Posted by SpudRider

You did a great job, Anthony! Thank you for the superb video, and photos. The Acewell computer looks great on your Gio Beast.

Spud

thanks you, it make me feel good

[the_ripper]

hey guys, sorry if this is a little off topic but since mostly everyone here has a beast and are discussing mods for them i was wondering if anyone had experimented with widening the stance on these quads (mostly rear axle) I found that with the front end you can switch the fron tires around so that the offset in the wheels makes that wider but this does not also apply to the rear. any suggestions?

[anthonyfa18]

Originally Posted by the_ripper

hey guys, sorry if this is a little off topic but since mostly everyone here has a beast and are discussing mods for them i was wondering if anyone had experimented with widening the stance on these quads (mostly rear axle) I found that with the front end you can switch the fron tires around so that the offset in the wheels makes that wider but this does not also apply to the rear. any suggestions?

i would start a new topic for that

[the_ripper]

Originally Posted by anthonyfa18

i would start a new topic for that

i did but it really didnt get anywhere

[SpudRider]

Originally Posted by the_ripper

i did but it really didnt get anywhere

Don't give up; go back, and try to revive your thread! The guys in the ATV forum are very helpful, and knowledgeable.

Spud