To anyone that drilled out their carbjets drill bit size?

CGcloner229 · 12-12-2023, 02:43 PM

What size is everyone running? Itd be great to know in inches, mm, or drill bit size seeing how all the jet companies run different number metrics god knows what the chinese clone jets are...i found this conversion chart
https://www.jetsrus.com/FAQs/FAQ_mik...ihin_sizes.htm

Im running a keihin pz 30, aftermarket, dont know if its a clone or not already had this argument before it has keihin stamped into it and its slighlty diffrrent then the stock carb which i have for backup. Ive tried 2 kits and all ive been able to find is the idle jets so ill just risk it id rather be on the rich side, at about sea level i was thinking between 0.050 and 0.056 " ??

12-12-2023, 02:43 PM	#1
CGcloner229 Join Date: Mar 2022 Posts: 68	To anyone that drilled out their carbjets drill bit size? What size is everyone running? Itd be great to know in inches, mm, or drill bit size seeing how all the jet companies run different number metrics god knows what the chinese clone jets are...i found this conversion chart https://www.jetsrus.com/FAQs/FAQ_mik...ihin_sizes.htm Im running a keihin pz 30, aftermarket, dont know if its a clone or not already had this argument before it has keihin stamped into it and its slighlty diffrrent then the stock carb which i have for backup. Ive tried 2 kits and all ive been able to find is the idle jets so ill just risk it id rather be on the rich side, at about sea level i was thinking between 0.050 and 0.056 " ??
	0