Accelerater pump Carburetor

Its_not_a_honda · 04-24-2018, 07:16 PM

Just got this today! It is a carburetor with an accelerator pump. I ordered it from aliexpress. I will be putting it on my Apollo 250 with the Zong engine. I will document it as I go and post pictures of the procedure.

Sorry the picture is sideways.

Its_not_a_honda · 04-24-2018, 07:25 PM

PowerZone PZ30 IRBIS TTR250 Tuning Tuned Power Jet For Keihin 30mm Carburetor + Visiable Twister + Cable + Repair Kit+grips

https://www.aliexpress.com/item/KEIH...95aed01dbcdb6f

This is the description from Aliexpress. All of this for about $43. And you get to pick what color hand grips you want.

Its_not_a_honda · 04-24-2018, 09:46 PM

**JerryHawk250** · 04-25-2018, 08:06 AM

No pictures.

don't tease me like that. lol

Its_not_a_honda · 04-25-2018, 10:05 AM

Quote:

Originally Posted by JerryHawk250

No pictures.

don't tease me like that. lol

Sorry! I had it on private. Can you see them now?

**JerryHawk250** · 04-25-2018, 10:07 AM

Quote:

Originally Posted by Its_not_a_honda

Sorry! I had it on private. Can you see them now?

Ahhh!!! That's better. I though I was going crazy.

lol Did you get it installed yet?

Its_not_a_honda · 04-25-2018, 10:15 AM

Quote:

Originally Posted by JerryHawk250

Ahhh!!! That's better. I though I was going crazy.

lol Did you get it installed yet?

No. Just got it yesterday. Probably do it Saturday.

Looking for more umph when accelerating on the trails. I need the front wheel to a least make an effort to raise up when I need to go over a rock, tree, ditch etc. I thought it might be the clutch slipping but runs too well climbing. It pulled me and my wife through some stuff I had no business going through. Lol. So I am starting with the carb. Bike is stock except for 12 tooth front.

**JerryHawk250** · 04-25-2018, 10:26 AM

I think that should help some. Will wait for the results.

Megadan · 04-29-2018, 10:41 AM

That bracket and spring are actually to allow you to run a cable choke for a handlebar choke lever if you so desired to set one up.

Weldangrind · 04-29-2018, 03:22 PM

I had a carb much like that on an old Honda XL250S, and it was a pleasure to ride. The throttle response was noticeably crisper than the 30mm Mikuni carb I'm used to, even when properly tuned. That bike started with one lazy kick.

Its_not_a_honda · 04-29-2018, 04:38 PM

So here it is installed. No big deal on getting put on. It comes with a new throttle cable and twist grip. You can see the cable is white. The only thing to watch out for is the gasket and insulator/spacer that goes between the carb and intake. It can be put on backwards. One way it fits perfect. The other way it blocks part of the intake. I changed out my gas tank to a plastic one while I had it apart. It actually took me longer to get the tank on than the carb and it was made for the bike. lol

Its_not_a_honda · 04-30-2018, 05:17 PM

Quote:

Originally Posted by Weldangrind

I had a carb much like that on an old Honda XL250S, and it was a pleasure to ride. The throttle response was noticeably crisper than the 30mm Mikuni carb I'm used to, even when properly tuned. That bike started with one lazy kick.

I really liked the bike before. Had plenty of power. Power just didn't hit a low rpms like I needed. Now it is like you say "crisper". When I grab a hand full of throttle I had better hang on. It is like having a hot rodded version of the Apollo. It starts quicker and no warm up needed.

Douglass · 04-30-2018, 07:52 PM

Its_not_a_honda:

Are you located in the US? I checked the Orion site, and everything is listed in Euro. If in the US, how long did it take to get the gas tank?

Douglass

Its_not_a_honda · 04-30-2018, 08:18 PM

Quote:

Originally Posted by Douglass

Its_not_a_honda:

Are you located in the US? I checked the Orion site, and everything is listed in Euro. If in the US, how long did it take to get the gas tank?

Douglass

Hahaha! You didn't read all my all of my post did you?

That's ok. I live near Charlotte NC. The center of all the NASCAR teams. Home of the Carolina Panthers. Close to the Lancaster Motor Speedway (the fastest 1/2 mile dirt track in the south). About as US as you can get. lol

Yeah the Orion site is in euros. I used paypal at check out and it converts to dollars. You can add all your stuff and google to get the dollar total if you want. I can't remember the time it took to get the parts. I think it was more than a week but not 2. I considered it fast compared to some of the china sites. lol

Don't forget to get the gas cap!!!!

Megadan · 04-30-2018, 09:32 PM

Quote:

Originally Posted by Its_not_a_honda

I really liked the bike before. Had plenty of power. Power just didn't hit a low rpms like I needed. Now it is like you say "crisper". When I grab a hand full of throttle I had better hang on. It is like having a hot rodded version of the Apollo. It starts quicker and no warm up needed.

And that is the result of no lean spots when rolling on throttle. Eventully I may switch over to one myself.

04-24-2018, 07:16 PM	#1
Its_not_a_honda Join Date: Jan 2018 Posts: 410	Accelerater pump Carburetor Just got this today! It is a carburetor with an accelerator pump. I ordered it from aliexpress. I will be putting it on my Apollo 250 with the Zong engine. I will document it as I go and post pictures of the procedure. Sorry the picture is sideways. __________________ 2020 Kawasaki KLX300R, 2018 Yamaha TW200 If you want more of something, tax it less. If you want less of something, tax it more.
	2

04-24-2018, 07:25 PM	#2
Its_not_a_honda Join Date: Jan 2018 Posts: 410	PowerZone PZ30 IRBIS TTR250 Tuning Tuned Power Jet For Keihin 30mm Carburetor + Visiable Twister + Cable + Repair Kit+grips https://www.aliexpress.com/item/KEIH...95aed01dbcdb6f This is the description from Aliexpress. All of this for about $43. And you get to pick what color hand grips you want. __________________ 2020 Kawasaki KLX300R, 2018 Yamaha TW200 If you want more of something, tax it less. If you want less of something, tax it more. Last edited by Its_not_a_honda; 05-13-2018 at 01:28 PM. Reason: added link
	0

04-24-2018, 09:46 PM	#3
Its_not_a_honda Join Date: Jan 2018 Posts: 410	Came straight from china. __________________ 2020 Kawasaki KLX300R, 2018 Yamaha TW200 If you want more of something, tax it less. If you want less of something, tax it more.
	0

04-25-2018, 08:06 AM	#4
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,555	No pictures. don't tease me like that. lol __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

04-25-2018, 10:26 AM	#8
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,555	I think that should help some. Will wait for the results. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

04-29-2018, 10:41 AM	#9
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,006	That bracket and spring are actually to allow you to run a cable choke for a handlebar choke lever if you so desired to set one up. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	0

04-29-2018, 03:22 PM	#10
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I had a carb much like that on an old Honda XL250S, and it was a pleasure to ride. The throttle response was noticeably crisper than the 30mm Mikuni carb I'm used to, even when properly tuned. That bike started with one lazy kick. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

04-29-2018, 04:38 PM	#11
Its_not_a_honda Join Date: Jan 2018 Posts: 410	So here it is installed. No big deal on getting put on. It comes with a new throttle cable and twist grip. You can see the cable is white. The only thing to watch out for is the gasket and insulator/spacer that goes between the carb and intake. It can be put on backwards. One way it fits perfect. The other way it blocks part of the intake. I changed out my gas tank to a plastic one while I had it apart. It actually took me longer to get the tank on than the carb and it was made for the bike. lol __________________ 2020 Kawasaki KLX300R, 2018 Yamaha TW200 If you want more of something, tax it less. If you want less of something, tax it more.
	1

04-30-2018, 07:52 PM	#13
Douglass Join Date: Aug 2017 Location: Bay Area, CA Posts: 375	Its_not_a_honda: Are you located in the US? I checked the Orion site, and everything is listed in Euro. If in the US, how long did it take to get the gas tank? Douglass
	0