|
02-11-2021, 04:13 AM | #1 |
Join Date: Feb 2021
Posts: 3
|
Posplayr,
thanks for the reply. My cable is original VAG K-line cable +€200,- so i wont think this could be the problem, still waiting on my openport. I found that the pin-out from different brands of scooter on the obd connector is different. Some use only 4 pins K-line, some 3 etc. If anybody needs extra background info to help let me know. Also working on the bullit series 125cc with succes in remapping. Looking for a way to extract .bin from bosch mse 6.0m for the zontes G125, U125, U-1 125, CF moto 650 series. Greetings |
|
02-19-2021, 12:00 AM | #2 | |
Join Date: Jun 2018
Posts: 5
|
Quote:
|
|
|
02-19-2021, 03:49 AM | #3 |
Join Date: Feb 2021
Posts: 3
|
Hunitori,
Can i extraxt the complete bin with WinolS? And flashback edited? Thanks |
|
02-21-2021, 11:48 PM | #4 |
Join Date: Jun 2018
Posts: 5
|
Do you have Whatapps? add me +84931865713
|
|
10-27-2022, 06:19 AM | #5 | |
Join Date: Apr 2022
Posts: 3
|
Quote:
The bad news - these binaries from MSE6.0 has near 3000 different routines ISO of 900-1000 for any Honda Keihin ECU. And the worst thing of all - address offsets are relative. r13 and r2 values are used as a reference for address offsets - this registers are writen at the inition of 2 binary sections with OPCODE. r2 and r13 values can be found searching for r2 and r13 operand usage in opcode window. But the 90% of routines still need to be executed in order to found which address it uses (maybe there is another way to do it, I don't know). It means that Ghidra doesn't detects references to addresses unless you execute this particular routine and creates a references to all addrsses it W/R. A true PITA cos it's veery difficult to create decent memory map. And without memory map theere is no way to analyse the routines. Personally I'm stuck with this ECU - of course I can see the maps, create xdf and so on but can't analyse the OPCODE as I'd like to. P.D. Just sorted the reference problem - now all references to RAM are correct! Last edited by hexman; 11-07-2022 at 09:39 AM. Reason: Update |
|
|
|
|
|
|