04-03-2017, 09:00 PM
|
#16 |
|
Join Date: Nov 2016
Location: robertsdale alabama usa
Posts: 1,007
|
and much easier to change
__________________
1991 harley heritage softail classic 2016 hawk kaw h1 400 tripple 13' long chopper in progress 2009 johnny pag bar hog 2004 hd electra glide ultra classic shriner edition 1997 harley davidson 1200 sportster 1972 harley davidson amf sx250 |
|
|
03-30-2020, 06:32 PM
|
#17 |
|
Join Date: Mar 2020
Posts: 8
|
I have been searching for a smaller rear sprocket for my Magician also. Can't find one. My solution is to get a JT sprocket P/N JTR269.40, and then using my original sprocket for a hole pattern, drill six mounting holes, and use spacers between the sprocket and the hub. By my rough calculations, the 40 tooth will work. Also, the center hole on the JT sprocket is larger than the one on the original, so it will not be a factor. Not a perfect solution, but for my riding style at my age should work just fine.
At 78 years old, still enjoying motorcycles. |
|
|
|
03-31-2020, 07:21 PM
|
#18 |
|
Join Date: Dec 2018
Location: PNW
Posts: 982
|
Welcome aboard Old Timer! I'm no spring chicken at 60 plus a few and I hope I'm still in the saddle at your age! A have a Magician and I have thought a lot about the sprocket. It is the weak area of this bike and it needs a 40 rear badly so I hope you can figure it out. It's gonna be close given the design. Rather than do it yourself I would suggest you contact these people and see if they can make you one. For the money I do not think you can beat it. Something I was gonna do I have not gotten around to. Let us know how it works out.
https://shop.pbisprockets.com/ |
|
|
|
|
|
 |
| Tags |
| magician 250cc |
|
|
Linear Mode
