Dong Fang DF250RTG - Page 2

**JerryHawk250** · 05-15-2020, 09:03 AM

Quote:

Originally Posted by Geaux-T

Hi I'm new to this.. my Df250 is coming in today. Like the upgrades y'all done on y'all's. Can't wait to fix up mine. I want to put a back rack on mine so f any of y'all come across one that fits on these bikes please let me know.

Geaux-T, you got to be from Louisiana with a name like that? lol welcome aboard.

Geaux-T · 05-15-2020, 11:20 AM

Quote:

Originally Posted by JerryHawk250

Geaux-T, you got to be from Louisiana with a name like that? lol welcome aboard.

Lol..how did guess? But it's not geaux tigers which most people think

Barnone · 05-15-2020, 09:07 AM

Quote:

Originally Posted by Geaux-T

Hi I'm new to this.. my Df250 is coming in today. Like the upgrades y'all done on y'all's. Can't wait to fix up mine. I want to put a back rack on mine so f any of y'all come across one that fits on these bikes please let me know.

Don't know of any rear rack but one could be made out of the rear grab bar.
Please post some photos of your DF.

Geaux-T · 05-15-2020, 11:22 AM

Quote:

Originally Posted by Barnone

Don't know of any rear rack but one could be made out of the rear grab bar.
Please post some photos of your DF.

Yea I was considering that but only if I can't find one. I'll try to post some pictures if I can figure how too..lol

Chris_Top_Her · 05-16-2020, 03:49 AM

Quote:

Originally Posted by Barnone

Don't know of any rear rack but one could be made out of the rear grab bar.
Please post some photos of your DF.

Hey, what can you tell me about that trailer? Custom/Bicycle trailer etc.. I'd be interested in something like that

Barnone · 11-10-2018, 09:20 PM

I made a blocking plaie and removed all the air injection plumbing. Cleans up the engine.
As far as top speed and MPG I just got the bike on Friday afternoon in the crate so it will be a while before I break her in. Need to register it anyway before I can do much riding.
My TU250X get up to 85 MPG. Odometer on it is correct.
So I assume the DF250RTG will be ok MPG wise.
$1700 delivered.
Oh, and it did come with four mirrors.

NoResource95 · 10-26-2022, 08:42 PM

Quote:

Originally Posted by Barnone

I made a blocking plaie and removed all the air injection plumbing. Cleans up the engine.
As far as top speed and MPG I just got the bike on Friday afternoon in the crate so it will be a while before I break her in. Need to register it anyway before I can do much riding.
My TU250X get up to 85 MPG. Odometer on it is correct.
So I assume the DF250RTG will be ok MPG wise.
$1700 delivered.
Oh, and it did come with four mirrors.

Can anyone explain the process for deleting the "air injection plumbing". I think it's the EGR system but I'm having issues getting my bike running after I installed a Nibbi carb. It no longer utilizes those hoses and I believe its causing issues with the vacuum of the engine. I can't get the bike running, it could possibly be the carb but I'm pretty sure getting rid of this emissions system will help.

Barnone · 11-18-2022, 10:06 AM

Quote:

Originally Posted by NoResource95

Can anyone explain the process for deleting the "air injection plumbing". I think it's the EGR system but I'm having issues getting my bike running after I installed a Nibbi carb. It no longer utilizes those hoses and I believe its causing issues with the vacuum of the engine. I can't get the bike running, it could possibly be the carb but I'm pretty sure getting rid of this emissions system will help.

Why did you replace the carb? If you don't know how to remove the AIS then you shouldn't be fooling with the carb.
Search this thread for the air injection system to get the info.
I made a plate to cover the port on the engine. You need to put a cap on the port on the intake manifold if I remember right.

Barnone · 11-11-2018, 10:34 AM

Added a mini tack.

**JerryHawk250** · 11-12-2018, 04:48 PM

Any road time yet?

flatlandsouth82 · 12-30-2023, 12:07 PM

Ok so ive learned the hard way dont block off the crankcase vent tube when installing the Nibbi setup ok. Lol just got the engine back together thought it was blowed lol!!!

Barnone · 02-06-2024, 10:52 PM

Quote:

Originally Posted by flatlandsouth82

Ok so ive learned the hard way dont block off the crankcase vent tube when installing the Nibbi setup ok. Lol just got the engine back together thought it was blowed lol!!!

What is the Nibbi set up? I tend to leave my bike unmodified nowadays. If it ain't broke then I won't fix it!

Barnone · 11-13-2018, 08:50 AM

Jerry.
Just a few kilometers around the block as the bike is not registered. Hopefully that will be done this week.
The odometer reads in Ks I think. Speedometer might be optimistic as the acceleration seems very good even with low breakin RPMs. I will check it with my speedometer app when I get a Ram cell phone holder for her.
Added some bar end mirrors from Amazon. I have used these on other bike and like them.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Might want to narrow the handlebars a bit.

You getting some snow in Cajun Land?

**JerryHawk250** · 11-13-2018, 09:12 AM

I'm really liking the bike.

You could always invest in a digital speedo. There are a few out there that would look and work perfect on that bike.

No snow down south but north La. is getting a little.

Barnone · 11-13-2018, 09:26 AM

I don't mind the odometer reading in K as my long gone Ural did the same and I got use to it. There is no trip meter but there is a reserve on the petcock.

11-12-2018, 04:48 PM	#10
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,554	Any road time yet? __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	2

12-30-2023, 12:07 PM	#11
flatlandsouth82 Join Date: Feb 2023 Location: Dexter Missouri Posts: 36	Crankcase Vent hose Ok so ive learned the hard way dont block off the crankcase vent tube when installing the Nibbi setup ok. Lol just got the engine back together thought it was blowed lol!!!
	0

11-13-2018, 09:12 AM	#14
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,554	I'm really liking the bike. You could always invest in a digital speedo. There are a few out there that would look and work perfect on that bike. No snow down south but north La. is getting a little. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

11-13-2018, 09:26 AM	#15
Barnone Join Date: Feb 2007 Posts: 1,348	I don't mind the odometer reading in K as my long gone Ural did the same and I got use to it. There is no trip meter but there is a reserve on the petcock.
	0