12-27-2023, 03:38 PM
|
#28 |
|
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,765
|
Tomorrow will be two months since I ordered the replacement hub. About a month since i ordered the reaction arm bushings. I went for an hour ride on Christmas day and had the bearings come loose in the hub again.
The bearings are a slip fit, press in by hand. Mine have spun so many times that the gap was .025"/.6mm. I figure if I take the wheel apart to have the hub sleeved now, I'll probably break a spoke. And those will be on back order. So I got the correct size stock and shimmed the puppies. I did a test fit that took some thinking on my part. Once I got them in place, it took a slide hammer to get them back out. That made me happy. I cut new shims and put it all back together. I also shimmed the reaction arm bushings. There's still some slop in there, but it's been reduced by half. New Years Day Freeze Your Ass Ride coming up on Monday.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
|
|
|
|
|
Threaded Mode