My TaoTao Hellcat 125cc

Chinabike · 04-09-2018, 11:52 AM

This is my new 2017 TaoTao Hellcat 125cc.

Current Mods.
Painted Black
FenderEliminator / Led rear turn signals
New shift lever
Some bolt upgraded or Loctite

Next Mods.
Carb
Muffler
Handle bar

Mowgli · 04-09-2018, 12:12 PM

What bolts didn’t you upgrade and where did you order them from?
The black looks good

Chinabike · 04-09-2018, 12:31 PM

Quote:

Originally Posted by Mowgli

What bolts didn’t you upgrade and where did you order them from?
The black looks good

So i only replaced the front and rear axle with grom ones that my friend gave me but here link to them and part number.

44301-K26-900
https://www.amazon.com/Honda-44301-K.../dp/B00NO00EHM

42301-K26-900
https://www.partzilla.com/product/honda/42301-K26-900

These are all the bolts i have order so far, hope it helps. But haven't installed them yet. I figured i'll just see how the stock go with just lock tight and keep checking them. I'll keep the new ones on hand if needed. I'm not going to be doing any stunts or wheels, easy riding

. So i think it will be ok.

https://www.ebay.com/itm/Honda-Bolt-...72.m2749.l2649

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

https://www.ebay.com/itm/8mm-M8x1-25....c100005.m1851

Chinabike · 05-01-2018, 12:02 AM

Ok update on my Hellcat.
Seems to be running pretty good right now... after my cylinder head fiasco.(My fault...broke a intake bolt and ruined the hole trying to get it out.) I had to replace the head and adjusted valves and timing a few times.

Rode it today easily got to 50 but didn't want to press it yet. Keep it around 25-45 for a hour.
Definitely feels like it wants to do more. Seems to be running better the more i ride it.

Current Mods.
Muffler
17t front
Uni airfilter
Mikuni Carb
26mm intake
fuel line/filter
Painted Black
FenderEliminator / Led rear turn signals
New shift lever
Some bolt upgraded or Loctite
Grom Chain tensioner
New ngk plug
New cylinder head

Chinabike · 05-02-2018, 12:10 AM

Ceasar1010 · 05-02-2018, 04:57 PM

Nice work , this is clean

Mowgli · 05-02-2018, 11:39 PM

What bolt did you break that caused you to replace the whole head?

Chinabike · 05-03-2018, 12:41 PM

Quote:

Originally Posted by Mowgli

What bolt did you break that caused you to replace the whole head?

I broke one of the intake mount bolts, i pretty much f'd it up more trying to take it out. Totally my fault breaking it. i didn't know if it was fixable and the cost to fix was more then a new head... here some pics

replaced with this

**JerryHawk250** · 05-03-2018, 01:40 PM

Your old head is fixable. Pick up aluminum welding rod at Harbor freight, Propane torch, fill in hole and drill and tap for bolt. Done this a few times on outboard motors before youtube was invented lol.

Chinabike · 05-03-2018, 03:14 PM

[QUOTE=JerryHawk250;279093]Your old head is fixable. Pick up aluminum welding rod at Harbor freight, Propane torch, fill in hole and drill and tap for bolt. Done this a few times on outboard motors before youtube was invented lol.

Thank for that video i was wondering how to do that. I might give it a shot some free day. But i don't know if it would be worth the time and money. I would have to buy a few tools and materials. New head was only $60

PhildoScaggins · 07-19-2018, 10:47 AM

Where did you buy your head? I need a new one for my vader.

imapdog · 07-19-2018, 10:55 AM

Quote:

Originally Posted by PhildoScaggins

Where did you buy your head? I need a new one for my vader.

i bought one here:
https://www.ebay.com/itm/54mm-Head-A...72.m2749.l2649
but now sold out. its a good reference though.....

PhildoScaggins · 07-19-2018, 11:49 AM

Quote:

Originally Posted by imapdog

i bought one here:
https://www.ebay.com/itm/54mm-Head-A...72.m2749.l2649
but now sold out. its a good reference though.....

Thanks! I'll start my search.

PhildoScaggins · 07-19-2018, 03:57 PM

Quote:

Originally Posted by imapdog

i bought one here:
https://www.ebay.com/itm/54mm-Head-A...72.m2749.l2649
but now sold out. its a good reference though.....

This has similar specs, looks a bit different where you adjust the valves.
any thoughts?

Mowgli · 05-03-2018, 02:10 PM

Was the bolt to long that you put into it? I noticed the kit from amazon the bolts bottomed out in the engine case. I’m just hoping I didn’t bust into the engine case but I haven’t had issues yet.

04-09-2018, 11:52 AM	#1
Chinabike Join Date: Jan 2018 Posts: 361	My TaoTao Hellcat 125cc This is my new 2017 TaoTao Hellcat 125cc. Current Mods. Painted Black FenderEliminator / Led rear turn signals New shift lever Some bolt upgraded or Loctite Next Mods. Carb Muffler Handle bar Last edited by Chinabike; 12-23-2018 at 03:41 PM.
	5

05-01-2018, 12:02 AM	#4
Chinabike Join Date: Jan 2018 Posts: 361	Ok update on my Hellcat. Seems to be running pretty good right now... after my cylinder head fiasco.(My fault...broke a intake bolt and ruined the hole trying to get it out.) I had to replace the head and adjusted valves and timing a few times. Rode it today easily got to 50 but didn't want to press it yet. Keep it around 25-45 for a hour. Definitely feels like it wants to do more. Seems to be running better the more i ride it. Current Mods. Muffler 17t front Uni airfilter Mikuni Carb 26mm intake fuel line/filter Painted Black FenderEliminator / Led rear turn signals New shift lever Some bolt upgraded or Loctite Grom Chain tensioner New ngk plug New cylinder head Last edited by Chinabike; 12-23-2018 at 03:40 PM.
	0

05-03-2018, 01:40 PM	#9
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,555	Your old head is fixable. Pick up aluminum welding rod at Harbor freight, Propane torch, fill in hole and drill and tap for bolt. Done this a few times on outboard motors before youtube was invented lol. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

04-09-2018, 12:12 PM	#2
Mowgli Join Date: Mar 2018 Posts: 37	What bolts didn’t you upgrade and where did you order them from? The black looks good
	0

05-02-2018, 12:10 AM	#5
Chinabike Join Date: Jan 2018 Posts: 361
	3

05-02-2018, 04:57 PM	#6
Ceasar1010 Join Date: May 2018 Location: Spring Texas Posts: 117	Nice work , this is clean
	0

05-02-2018, 11:39 PM	#7
Mowgli Join Date: Mar 2018 Posts: 37	What bolt did you break that caused you to replace the whole head?
	0

05-03-2018, 03:14 PM	#10
Chinabike Join Date: Jan 2018 Posts: 361	[QUOTE=JerryHawk250;279093]Your old head is fixable. Pick up aluminum welding rod at Harbor freight, Propane torch, fill in hole and drill and tap for bolt. Done this a few times on outboard motors before youtube was invented lol. Thank for that video i was wondering how to do that. I might give it a shot some free day. But i don't know if it would be worth the time and money. I would have to buy a few tools and materials. New head was only $60
	0

07-19-2018, 10:47 AM	#11
PhildoScaggins Join Date: Apr 2017 Location: Woods, Maine Posts: 247	Where did you buy your head? I need a new one for my vader.
	0

05-03-2018, 02:10 PM	#15
Mowgli Join Date: Mar 2018 Posts: 37	Was the bolt to long that you put into it? I noticed the kit from amazon the bolts bottomed out in the engine case. I’m just hoping I didn’t bust into the engine case but I haven’t had issues yet.
	0