Changing GY6 Scooter Clutch Springs

tortoise · 04-22-2016, 09:43 PM

This technique worked very well. Ice pick is one option. Heat tip on a stove element to bend angle if desired.

Source . . clutch springs . . contra spring

Re-grease torque driver while clutch is disassembled. Walmart Super Tech grease works fine.

Placing a loop of 5/32" Teflon valve packing (hardware store plumbing department) in the spring base may ease the twisting movements.

De-glaze pads and inner bell surface with some type of abrasive.

Bad clutch bearing and related videos (Honda Elite 110 scooter).

04-22-2016, 09:43 PM	#1
tortoise Join Date: Jan 2008 Posts: 221	Changing GY6 Scooter Clutch Springs This technique worked very well. Ice pick is one option. Heat tip on a stove element to bend angle if desired. Source . . clutch springs . . contra spring Re-grease torque driver while clutch is disassembled. Walmart Super Tech grease works fine. Placing a loop of 5/32" Teflon valve packing (hardware store plumbing department) in the spring base may ease the twisting movements. De-glaze pads and inner bell surface with some type of abrasive. Bad clutch bearing and related videos (Honda Elite 110 scooter). Last edited by tortoise; 04-23-2016 at 02:57 PM.
	1