Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 02-04-2020, 01:48 PM   #1
pugg330   pugg330 is offline
 
Join Date: Feb 2020
Location: Texas
Posts: 6
Tight Budget commuter/ adventure TBR7

So I have had a 2020 TBR7 for a few months and i want to look into modding it to commute on the highway and go off road on the cheap but i dont know where to start on mods and some ergonomics. I spend a lot of time on pavement but i still want to be offroad ready for when funds open up to got explore.


 
Reply With Quote
Old 02-04-2020, 03:31 PM   #2
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,555
Welcome aboard! One of the first mods would be to change the gear ratio by swapping out the rear sprocket to a smaller sprocket to bring down the rpm's at higher speeds. Maybe a 40-42 tooth. I'm not sure what the TBR7 has on the front but a 17 tooth would be an improvement over a 15 or 16 tooth.
__________________
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 02-04-2020, 07:00 PM   #3
kingofqueenz   kingofqueenz is offline
 
Join Date: Apr 2019
Location: Strong Island New Yawk
Posts: 464
Front is stock 15... swapping to a 17 is almost like circumcision, should be done at birth as it makes the gearing much taller.

With the 15 tooth stock I'm in 2nd gear before I leave my driveway

If you swap the rear, I suppose you may need to make adjustment to your chain (remove links etc. )

15 swap to 17 required no chain alteration or replacement, stock chain worked fine ...for now ( cue in suspenseful music )


 
Reply With Quote
Old 02-04-2020, 11:12 PM   #4
culcune   culcune is offline
 
culcune's Avatar
 
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,035
Question

Quote:
Originally Posted by kingofqueenz View Post
Front is stock 15... swapping to a 17 is almost like circumcision, should be done at birth as it makes the gearing much taller.

With the 15 tooth stock I'm in 2nd gear before I leave my driveway

If you swap the rear, I suppose you may need to make adjustment to your chain (remove links etc. )

15 swap to 17 required no chain alteration or replacement, stock chain worked fine ...for now ( cue in suspenseful music )
Ahhhhhhhh! Hurt reading about circumcision!!! 😂😂😂😂
I bought a chain cutter from Harbor Freight a few years back. It worked well...crude, but effective. I think most Chinese sweet street-spot gearing is 17/44, although I recall people here and on youtube mentioning going as high as 17/39.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..."

TGB Delivery Scooter 150
TMEC 200 Enduro--carcass is sadly rotting in the backyard


 
Reply With Quote
Old 02-05-2020, 07:47 AM   #5
kingofqueenz   kingofqueenz is offline
 
Join Date: Apr 2019
Location: Strong Island New Yawk
Posts: 464
Quote:
Originally Posted by culcune View Post
Ahhhhhhhh! Hurt reading about circumcision!!! 😂😂😂😂
I bought a chain cutter from Harbor Freight a few years back. It worked well...crude, but effective. I think most Chinese sweet street-spot gearing is 17/44, although I recall people here and on youtube mentioning going as high as 17/39.


17/39 would probably be dead sexy for street commuting ... I likey


 
Reply With Quote
Old 02-06-2020, 08:56 PM   #6
pugg330   pugg330 is offline
 
Join Date: Feb 2020
Location: Texas
Posts: 6
Okay any other suggestions

Ok so gearing sounds like a 17/40 sounds like a great idea. Any recommendations on tires and luggage options?


 
Reply With Quote
Reply

Tags
enduro, tbr7 250



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:56 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.