12-05-2023, 08:21 PM
|
#1 |
|
Join Date: Nov 2023
Posts: 32
|
Kill Switch Bashan Storm 250
So TLDR my Bashan storm does not have a kill switch. It instead is a hazard light......could I rewire my hazards to be the kill switch?
Side note: the alarm system and keyless start bs was removed already so thats not in the bike 
|
|
|
12-10-2023, 03:41 PM
|
#2 |
|
Join Date: Nov 2020
Location: Jackson Co.
Posts: 22
|
That's a good question and would like to know myself since my Brozz Recon 250 has the same setup.
__________________
2020 Bashan Brozz Recon 250 |
|
|
|
12-11-2023, 07:28 AM
|
#3 | |
|
Join Date: Nov 2020
Location: Jackson Co.
Posts: 22
|
Quote:
Assuming the wire colors are the same on these bikes.
__________________
2020 Bashan Brozz Recon 250 |
|
|
|
|
12-12-2023, 05:06 PM
|
#5 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,554
|
Check this post. https://www.chinariders.net/showpost...36&postcount=9
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
12-12-2023, 06:41 PM
|
#6 |
|
Join Date: Nov 2023
Posts: 32
|
Thanks all! Ended up following goat67's way of doing it and got it to work pretty easily. Completely cut the orange wire off and just spliuced the blue to the green and the grey to the black and white. Very easy honestly and happy I didn't need to pay anything to do it.
__________________
1984 Honda Magna V30 Custom bobber, rigid shocks 2014 Bashan Storm 250 Pod filter, Denso 4099, Rotella T4 15w-40 2021 Vitacci Bullet 85/33 jets, 5g roller weights, 80cc big bore |
|
|
|
|
|
 |
|
|
Linear Mode
