Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 07-23-2017, 10:20 PM   #1
ChondaChondaChonda   ChondaChondaChonda is offline
 
ChondaChondaChonda's Avatar
 
Join Date: Oct 2016
Posts: 547
Pitster Pro LXR250 EFI tuning - KAYO EFI

So I finally loaded the software that comes with the bike and played around with it. As is common with China bikes, the instructions are not well translated. I wonder if a Chinese speaker could make the procedure more clear for those of us in English speaking places??

The software looks fairly well done, it loaded right up and started talking to the bike with no issues. The first mode I used is called "Running" mode and it basically shows things like throttle position, temperature, O2 signal, etc.

The instructions tell you to enter "Debug" mode to turn the throttle to full while you put the key to "on". This put us in tuning mode!

The next part says to wait for the "0" position to turn green, then go to 4, 8, 12, 16, 32, etc.. The motor revs waaay to high at these throttle positions so I wondered if this was to be done on a dynometer or something??

So, I rigged the laptop up with some zip ties to see if I could get it to "Tune" while riding.





 
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:16 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.