Extremely excited! - Page 9

dubbya1986 · 04-18-2017, 09:14 AM

Quote:

Originally Posted by BigWeld

I know, right? I ordered them on 4/3/2017, today's the 15th....12 days. Kind of sucks, I got impatient and ordered another set off of eBay two days ago, so if you know of anyone who's going to be wanting a set.....LoL!!!!

Is is the same set as the one you just got in? How much for them?

BigWeld · 04-18-2017, 12:13 PM

Same exact set, how's $15 shipped sound?

dubbya1986 · 04-18-2017, 05:22 PM

Quote:

Originally Posted by BigWeld

Same exact set, how's $15 shipped sound?

Have you had time to replace jets and if you did, did it make a difference?

BigWeld · 04-18-2017, 07:08 PM

I haven't but have faith; it WILL make a difference

BigWeld · 04-18-2017, 07:27 PM

Here's my "china bike porn" donation for today....

Kipper1012 · 04-18-2017, 07:38 PM

Oh I love me some Asian Porn.

BigWeld · 04-24-2017, 07:55 PM

Well, I took a cutoff wheel to the bowl screws on my Keihin today at work, then dug into it once I got home.

In stock trim, she had a 105 main jet. Not even close to being broken in yet, and with the stock pipe and can on it, I opted to go with just a 110 main. My low end felt fine before, so I never messed with the slow jet.

Once I got out to the bike with the carb in my hand, I realized that I forgot to grab a flat washer from work. Shit. Back in the house we go to look for a suitable substitute......

Know what works AWESOME? The tip of the plug on pretty much anything AC

I cut the rounded tip off, then cut the hole off leaving me a square washer that fit the needle in my Keihin PERFECT LoL

Got her back together, cruised around the back yard a few laps and then let her rip down my road a short stretch. WHAT A DIFFERENCE!!! Seriously, night and day. In the little stretch I have near my home I struggled getting to 50 (indicated). This time, I had it pulling HARD until about 4500 in 5th, looked down and saw an indicated 64!!!! The shimmed needle, tweaked A/F screw and swapping in a 110 on the main jet truly woke up this bike's mid range and (lower) top end. I can't WAIT until this Bashan has more miles on the clock, I'm itching to put my pipe on and jet it again!!!!!

If any of youBrozz or Shark owners are hesitant about getting into your carb, DON'T BE. You're bike will thank you for it.

da4design · 04-24-2017, 08:10 PM

thanks for this, i will be rejetting mine this weekend, this will help me! just gotta look for a spare AC plug..lol

BigWeld · 04-24-2017, 08:20 PM

Quote:

Originally Posted by da4design

thanks for this, i will be rejetting mine this weekend, this will help me! just gotta look for a spare AC plug..lol

As you can see, I now have a spare LOL send it to ya? Hahahahah

da4design · 04-24-2017, 08:23 PM

Deal!

MOTOXtreme · 04-24-2017, 08:44 PM

Quote:

Originally Posted by BigWeld

As you can see, I now have a spare LOL send it to ya? Hahahahah

AC plug?? LOL. Thats awesome to hear man. My jets arrived today and your post is just what I was wanting to hear. I was undecided as to which jet to go with but I'll toss in that 110 asap.

timcosby · 04-24-2017, 11:01 PM

and just what purpose does those holes in the a/c plug serve????
needle shims apparently

MOTOXtreme · 04-25-2017, 07:38 AM

Quote:

Originally Posted by timcosby

and just what purpose does those holes in the a/c plug serve????
needle shims apparently

Yes. Some needles have slots for rich/lean clip settings. The PZ30 in our Brozz does not so it must be shimmed with thin washers to raise the needle a tad , more rich.

Kipper1012 · 04-25-2017, 09:29 AM

Maybe im blind I could not find any main jet kits for our carbs PD30 or PZ30 on ebay.
where did you guys get yours ?

All I found was these for the PWK.
http://www.ebay.com/itm/10pcs-Carbur...38.m2548.l4275

da4design · 04-25-2017, 10:09 AM

I copied bigweld and ordered these https://m.aliexpress.com/item/32780935148.html

04-18-2017, 12:13 PM	#122
BigWeld Join Date: Nov 2016 Location: East Pembroke, NY Posts: 301	Same exact set, how's $15 shipped sound? __________________ Rides a 2016 Bashan 18C with Blue PlastiDip, piped and jetted, USB charger, real-time digital volt meter, faux carbon fiber handguards, 5 COB led headlight upgrade, auxiliary led light bars, and an MSR shift lever with new grips, T6 aluminum handlebars anodized in blue, polished handlebar brace, decals, HD Unibear chain and spoke covers waiting on the always-full mod shelf......
	0

04-18-2017, 07:08 PM	#124
BigWeld Join Date: Nov 2016 Location: East Pembroke, NY Posts: 301	I haven't but have faith; it WILL make a difference __________________ Rides a 2016 Bashan 18C with Blue PlastiDip, piped and jetted, USB charger, real-time digital volt meter, faux carbon fiber handguards, 5 COB led headlight upgrade, auxiliary led light bars, and an MSR shift lever with new grips, T6 aluminum handlebars anodized in blue, polished handlebar brace, decals, HD Unibear chain and spoke covers waiting on the always-full mod shelf......
	0

04-18-2017, 07:27 PM	#125
BigWeld Join Date: Nov 2016 Location: East Pembroke, NY Posts: 301	Here's my "china bike porn" donation for today.... __________________ Rides a 2016 Bashan 18C with Blue PlastiDip, piped and jetted, USB charger, real-time digital volt meter, faux carbon fiber handguards, 5 COB led headlight upgrade, auxiliary led light bars, and an MSR shift lever with new grips, T6 aluminum handlebars anodized in blue, polished handlebar brace, decals, HD Unibear chain and spoke covers waiting on the always-full mod shelf......
	3

04-18-2017, 07:38 PM	#126
Kipper1012 Join Date: Mar 2017 Location: Florida Posts: 198	Oh I love me some Asian Porn. __________________ 2016 Green Bashan Brozz.
	0

04-24-2017, 07:55 PM	#127
BigWeld Join Date: Nov 2016 Location: East Pembroke, NY Posts: 301	Well, I took a cutoff wheel to the bowl screws on my Keihin today at work, then dug into it once I got home. In stock trim, she had a 105 main jet. Not even close to being broken in yet, and with the stock pipe and can on it, I opted to go with just a 110 main. My low end felt fine before, so I never messed with the slow jet. Once I got out to the bike with the carb in my hand, I realized that I forgot to grab a flat washer from work. Shit. Back in the house we go to look for a suitable substitute...... Know what works AWESOME? The tip of the plug on pretty much anything AC I cut the rounded tip off, then cut the hole off leaving me a square washer that fit the needle in my Keihin PERFECT LoL Got her back together, cruised around the back yard a few laps and then let her rip down my road a short stretch. WHAT A DIFFERENCE!!! Seriously, night and day. In the little stretch I have near my home I struggled getting to 50 (indicated). This time, I had it pulling HARD until about 4500 in 5th, looked down and saw an indicated 64!!!! The shimmed needle, tweaked A/F screw and swapping in a 110 on the main jet truly woke up this bike's mid range and (lower) top end. I can't WAIT until this Bashan has more miles on the clock, I'm itching to put my pipe on and jet it again!!!!! If any of youBrozz or Shark owners are hesitant about getting into your carb, DON'T BE. You're bike will thank you for it. __________________ Rides a 2016 Bashan 18C with Blue PlastiDip, piped and jetted, USB charger, real-time digital volt meter, faux carbon fiber handguards, 5 COB led headlight upgrade, auxiliary led light bars, and an MSR shift lever with new grips, T6 aluminum handlebars anodized in blue, polished handlebar brace, decals, HD Unibear chain and spoke covers waiting on the always-full mod shelf......
	1

04-24-2017, 08:10 PM	#128
da4design Join Date: Mar 2017 Location: texas Posts: 253	thanks for this, i will be rejetting mine this weekend, this will help me! just gotta look for a spare AC plug..lol
	1

04-24-2017, 08:23 PM	#130
da4design Join Date: Mar 2017 Location: texas Posts: 253	Deal!
	0

04-24-2017, 11:01 PM	#132
timcosby Join Date: Nov 2016 Location: robertsdale alabama usa Posts: 1,007	and just what purpose does those holes in the a/c plug serve???? needle shims apparently __________________ 1991 harley heritage softail classic 2016 hawk kaw h1 400 tripple 13' long chopper in progress 2009 johnny pag bar hog 2004 hd electra glide ultra classic shriner edition 1997 harley davidson 1200 sportster 1972 harley davidson amf sx250
	0

04-25-2017, 09:29 AM	#134
Kipper1012 Join Date: Mar 2017 Location: Florida Posts: 198	Maybe im blind I could not find any main jet kits for our carbs PD30 or PZ30 on ebay. where did you guys get yours ? All I found was these for the PWK. http://www.ebay.com/itm/10pcs-Carbur...38.m2548.l4275 __________________ 2016 Green Bashan Brozz.
	0

04-25-2017, 10:09 AM	#135
da4design Join Date: Mar 2017 Location: texas Posts: 253	I copied bigweld and ordered these https://m.aliexpress.com/item/32780935148.html
	0