Biker_Andy |
10-19-2018 11:15 AM |
Well as a Canadian with a TT250 I should probably chime in. First I had a good laugh when you mentioned extream cold. - 40° is fairly cold when your working outside for 10 hours but I wouldn't call it extream. I put about 30 miles on my TT250 yesterday but it was beautiful outside and all the snow had melted. I know how much you easterners love your roads plastered with salt. Here it's usually too cold in winter for salt. If they do salt roads it brings the moose onto the highways edge to lick the salt off. The good thing about moose and motorcycles is you never hit more then one in your life. The bad thing is that it's because at best you'll never be able to ride again. Now for the advice...
The only thing you really need to "winterize" is yourself. Your TT250 will do fine in the cold. I'd run the stock battery until its toast because you can always kick start her if you need too but I'm cheap and can't justify replacement until theres a failure. Most important things you need to address in cold weather riding is keeping your visor clear and your hands warm. Frozen hands or a frosty visor is very dangerous. There's several ways to keep your hands warm and since your commute is only 10 blocks all you really need is decent gloves. I've had a lot of problems keeping my visor clear when it's cold out. One breath with the right temperature and humidity can make it impossible to see through. I'd suggest no visor and instead a good pair of safety glasses and a balaclava for under your helmet. Another danger of cold weather riding is a frost covered seat. Your seat can be extremely slippery if it has a good layer of frost on it. Make sure to clean it good before you ride if she sits outdoors. I keep an extra cloth in my top box so I can wipe off the seat when needed.
|