Quote:
The ZS preface of the engine code for my engine is unusual. However, the ZS167FML code is necessary, since my Yamaha cloned engine is significantly different from the standard, 167FML engine, which is a Honda cloned engine. ;) Spud :) |
Quote:
Just as Colin says in the Youtube video, the engine is based on a Honda CBF230, which is a product that was never released in North America, AFAIK. The CRF230 looks to be the same platform as well, with a two-valve OHC and electric start. BTW, your engine is likely to be 230cc also, despite it being referred to as a 250. You might see the actual displacement stamped on the engine. The top end of your engine is very familiar to me, because it is just like a two-valve OHC XR200R. |
I knew Weldangrind would have the answer. ;) I remember Colin stating the bike had a CBF230 engine, but I am unfamiliar with that engine, since it never arrived in North America. :)
Spud :) |
Quote:
I know the engine is not 250cc, but 223. SkyTeam state that on their website and in the user's manual, plus I already read about this 250 naming delusion here in the forum :) http://www.skyteam.cn/spe.asp?id=243 I just saw that SkyTeam have a company in Canada: http://www.skyteamcanada.com/index.html |
Too bad they aren't likely to import your model into Canada. It's a big deal to get approval from Transport Canada, and it's very costly. The rules are almost non-existant for dirt bikes and atv's.
I'm not sure, but I think Saga in Langley, BC is now carrying SkyTeam. |
Apparently a mixture of offdays, bad weather and Internet access is not the best one can experience.
Hoovering around the virtual reality, I came across a forum thread called "Pooratech" ( :lol: :lol: :lol: ) in a South-African forum (tell me about it!) - http://www.wilddog.za.net/forum/inde...&topic=12116.0 So, from there I was inspired to build myself a toolbox for the new toy. I may not be riding, but can do lots of dumb things. I got myself a PVC pipe from the local hardware store: https://lh3.googleusercontent.com/-j...6/IMG_1193.JPG 2 caps (apparently this is how they are called) and a drawer lock: https://lh5.googleusercontent.com/-U...6/IMG_1192.JPG One afternoon of cutting, drilling, swearing, scratching my head, and voila: https://lh6.googleusercontent.com/-m...6/IMG_1199.JPG https://lh3.googleusercontent.com/-z...6/IMG_1198.JPG https://lh6.googleusercontent.com/-V...6/IMG_1197.JPG https://lh3.googleusercontent.com/-e...6/IMG_1200.JPG The masterpiece is 450mm long and 125mm in diameter (that's about 18x4.5 inches for our imperial viewers), which turned out quite big: https://lh4.googleusercontent.com/-Z...6/IMG_1202.JPG https://lh3.googleusercontent.com/-O...6/IMG_1203.JPG If it turns out that these sticking bolts get in the way, I'll swap them with rivets. The "cool" lock: https://lh4.googleusercontent.com/-3...6/IMG_1194.JPG https://lh3.googleusercontent.com/-X...6/IMG_1195.JPG https://lh3.googleusercontent.com/-d...6/IMG_1196.JPG The official version for the insulation band is that it's there to improve water tightness, but the cruel truth is that I put it to cover the dodgy cut I made: https://lh4.googleusercontent.com/-k...6/IMG_1204.JPG Well this is for now. I made it that far. Now I'm contemplating on the next creation - cheap and simple pannier racks... I hope I won't mess up the nice bike until spring time (my wife hopes!). |
Very nicely done! Is it waterproof? Can you fit some sort of a gasket under the lid?
You get extra credit for the lock. Good engineering. :P |
Well done! You could put several tools, your lunch and a litre of beer in there. I like the lock.
|
You did a very good job, Krasi. :) The lock is an especially nice touch. ;)
Spud :) |
Quote:
Actually I had to grind the cap a little from the inside to facilitate putting on and taking it off. Originally it took some hammer tapping to do so. Hey, Weldangrind, we're one the same page. This is what I've been envisioning while tinkering with it. |
fellow v raptor owner
greetings all!
What an excellent thread I can see here, mind if I mosy on in and be apart of it? Im from Australia, down here they call it the V-retro ( I think raptor is cooler) I got mine for a great price and ride it all the time, i'm very happy with the product. I have been finding it hard to find information on the bike online so I am relieved to find a thread of seemingly experienced fellows talking about it. So its my birthday soon (30th Dec) and as a present to myself I was going to make it go FASTER. Of course you can all understand this desire :) I made contact with a guy in Western Australia who fitted one of these on his : http://www.crossfiremotorcycles.com/...ike-motor.html seems simple enough, he said the hardest part was the electronics. Ideally I would like to spend the extra money for the engine of this bike : http://www.crossfiremotorcycles.com/...-valve-sp.html Its possible to buy just the engine but im not sure if the power/weight would be too much for the bike. The first engine I know can be done and is a bit cheaper. Im not so sure about the second engine, the mounts seem to be the same, from inspection it seems as though it would fit. This is where i need the advice from you seasoned engineers. Again, a fantastic thread! any insight on what I intend would be greatly appreciated. Dan |
Welcome; we are glad you joined us, Sleeper. :) I'd be inclined to install the Zongshen engine. ;) Zongshen makes good engines, and someone has already installed this engine in your bike. Therefore, your job should be considerably less difficult if you choose the Zongshen engine. :)
Spud :) |
Hey, daysleeper. It's seems quite a challenge you plan to do. What are your plans for the radiator(s)?
|
Well, I'm still off work and outside it still is like that
https://lh6.googleusercontent.com/-m...k/IMG_1238.JPG so I continue with my nonsense creations. I made my self a DYI chain oiler. I've been making such basically for all my bikes using gardening taps and urinary tubes - local pharmacists are always looking strange at me :) Now, I decided to go the route, suggested by this fella: http://www.youtube.com/watch?v=7xg1bOcV3rI The "tank" is actually brake fluid container from Lada (the most popular Russian car brand, for our distant readers): https://lh3.googleusercontent.com/-W...k/IMG_1220.JPG The personal touch I threw in, comes in the form of a fuel cut-off valve, which is very widely used around here as part of car LPG conversion kits: https://lh5.googleusercontent.com/-W...k/IMG_1231.JPG The "holder" role of the tube to the swingarm is performed by a shoe-polishing sponge box: https://lh6.googleusercontent.com/-y...k/IMG_1221.JPG https://lh3.googleusercontent.com/-x...k/IMG_1235.JPG The container is on the right-hand side of the frame, while the valve and tap are bolted on the front of the air box: https://lh3.googleusercontent.com/-W...k/IMG_1233.JPG https://lh5.googleusercontent.com/-2...k/IMG_1234.JPG https://lh4.googleusercontent.com/-l...k/IMG_1237.JPG Valve power supply I took from the positive pole of the rear brake switch, because it was most easily accessible, so now when I turn the ignition on, it opens up. On a side stand, in the cold garage it works: https://lh6.googleusercontent.com/-W...k/IMG_1241.JPG When the weather outside becomes more rideable I'll check it in real life conditions. |
That's ingenious, Krasi! Please let us know how well it works! :)
Spud :) |
All times are GMT -4. The time now is 11:39 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.