ChinaRiders Forums - Templar 250M here

ChinaRiders Forums (http://www.chinariders.net/index.php)

- New Member Introductions (http://www.chinariders.net/forumdisplay.php?f=112)

- - Templar 250M here (http://www.chinariders.net/showthread.php?t=31935)

Quote:

Originally Posted by Thumper (Post 388432)

Now that you are in a deep freezer, the M will remain parked for a couple of months:cry:

So you can do the carb work.

I have the same engine- ZS172FFM-3A
I recommend increasing from #40 to #42 pilot and #120 to #125 main jet.

I had a #45 pilot in there, but too rich. You can shim the needle about 1mm.

I can send links to posts where these instructions with photos are. The are in the pics and video section in Temp X (2022 1/2) thread, page 2..

Stay warm!

Thanks and here is the video I made re: 16T Front sprocket, showing clearance.

https://youtu.be/osV93vrvUqM

https://youtu.be/osV93vrvUqM

Quote:

Originally Posted by WindMindMusic (Post 388918)

Still riding. Battery took a dump. Leaking acid. I guess they cut corners there to give a better overall product. Looked up the battery on Ali and it was $6 Lol going to upgrade it.

I got a good 80 CCA battery for about that just fits into the battery cradle. Weize YTX5L-BS
But might not be available now, but Mighty Max brand is, and others for about 20 bucks with the same part number. Check dimensions if possible, but looks good. Returns are OK.