more fudge is made 8)
|
Excellent. Are you actually gonna save some for me this time? Not that I didn't enjoy that awesome lemon meringue pie.
|
Quote:
you betcha....well if you make it over in time that is......when is your comming over again?????? :P |
I've got the parts ready now. Coming to get it, or do you want me to drop it off?
|
Quote:
you can see the project as well |
mmmmm fudge ....tasty tasty fudge :twisted:
|
Sent you a text, but didn't hear from you. I know that you turn into a pumpkin after 8:30.
|
Quote:
ya I can come over tonight if you want but don't know if the fudge will make it :wink: |
got the swing arm installed but only enough room for one washer on one side
I am guessing that is why there were rubber ones? as for making sure the two sprockets line up the only other thing I can see is to shim the sprocket over here it is where it is always bolted (nuts and washers removed and bolts slid back) you can see that the chain isn't quite in line http://i58.photobucket.com/albums/g2...ar/atvs052.jpg here is where the sprocket has to sit to be in full line with the front http://i58.photobucket.com/albums/g2...ar/atvs053.jpg spacer ? (2 piece preferably ) |
My guess is that the sprocket was never in line. As long as the chain isn't too tight, it shouldn't be an issue.
If you want to correct it, try to determine the distance that the sprocket needs to move in order to be perfect. That amount could then be cut from the left side of the swingarm for proper alignment. I wouldn't space the sprocket, because that puts it too close to the rear end housing, and it should bear against the hub. |
I put it back where it is supposed to be and re-bolted it together but will give it a bit more slack in the chain as it seemed a bit tight.
now seeing as I could only get one washer on one side is the other side going to wear on the new bushing ? going out riding tomorrow so will let you know how it works. |
I wouldn't worry about it; just slather it with grease. You might not need any washers between the swingarm and the frame.
|
Did you ever get any fudge, Weld? :?: Inquiring minds want to know! :?
Spud :lol: |
Quote:
|
I was thinking that nylon washers (or similar) would be a good idea as well.
|
All times are GMT -4. The time now is 09:17 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.