RX3 filters
 

Well folks due to fat finger late night ordering I managed to order (2) 2 piece RX3 reusable filters from AliExpress. That gives me 4 of these things and I really only want 2. AliExpress has a listing showing they are still 28 bucks for 2. Anyone interested in buying these off me for that same price let me know ... otherwise I reckon I'll be well stocked lol. Shoot me an IM if you are interested. I will say they are high quality and I see why Spud and others have made the switch.

Jets, jets, and more jets!

Got some more Mikuni main jets for the Bashan and some Keihin pilot jets for my Kawasaki, have to finish the 'fine tuning' :D

Bashan is running great so far on a 25 slow (still need to try a 22.5), but needs a different main jet for fine tuning still, have a 98, 100, 105, 110, 115 in the set... so I ordered another set with 102, 108, 112, 118 and a few others :hehe:

Now I just have to wait for them to arrive from China :lol:

The Bashan WILL is now ride-able and we'll be putting (s)miles on it daily now, with or without those 'fine tuning' jets :tup:

I bought 2600lbs of gravel yesterday and will be buying another 2600lbs today.

Mmmmm! People talking about guns!!!! Building a .308 AR right now to add to my collection. Then i have 2 - .556 AR lowers with sequential serial #'s to build out for my girls, (have a friend who worked for SI defense and bout a bunch of blems) Would REALLY like one of these but have China Bike needs 1st LOL!!!

https://www.youtube.com/watch?v=U1aH9VEpsU0

I bought myself a brand new SCCY CPX-1 9mm for concealed carry. :)

A tax stamp for a suppressor. :D

Ok I will play .This morning I bought a honda element ,a 14' canoe ,two 14' aluminum fishing boats ,and after lunch I bought an 18' canoe .All the boats will be gone before next weekend ( first long weekend without snow around here ) ,not sure if the kids will learn to like the manual gearbox in the element so it might be gone by next weekend as well .
Today I sold a honda ct70 ,and my honda ct70 clone army green wheelie bike ,I will miss the wheelie bike but I have another 8 ct70's here I can build myself an even better one by the end of the day .
Days not over ,I should have time to buy some more canoes .

Did you win the Wyo lotto the other week or something ? :lol: lots of cash being spent in that last post, hope the kids have enough left for school :p

I am retired and bored ,so I buy and sell stuff all the time .I usually flip about 5 canoes a week from now until early august ,I always flip dirt bikes and have about 40 on hand ,cars ,trucks and jeeps move in and out of here quickly as well .i did 3 canoes last week and 7 dirt bikes ,and bought a chevy avalanche that I flipped to my good buddy who wanted it way more than me .I bought myself a jeep tj to keep a few weeks back ,and besides collecting a few parts for it I have not had a chance to do a darned thing to it .It will be my 100th topless jeep ,but only the third I actually drive and hopefully this time I will keep it instead of taking the easy money that walks through my door .
Yep ,I am a little sick .

Attachment 5843

Gotta start somewhere...... Day one with the green machine.

And another ton of grade 8 gravel.

LOL! That doesn't sound retired to me! Good for you though to keep the "business bug" alive and kickin'!

Thanks for playing, if there was a prize for playing, you probably would flip that too¡:lol:

It's sometimes amazing the stuff I flip ,find etc ,the key difference with me over many of you is I have the time .

I bought this a few days ago and it just arrived today.

NEVER leave home without one....don't ask how I know! :hmm:

You also have to love the art of the deal, and not mind dealing with lots of different people. I have two motorcycles right now I'd love to sell but can't stomach the fact I have to deal with the people....so they sit!
It takes a a special personality. I'm more of a hermit. It's why I live where I do!

Badazz.

I love the only noise being the thump of target impact and the action cycling and the brass hitting the ground. Just stay subsonic and all is good in the world.

Flipping is fun but a person has to have a lot of time and a sense of humor and the ability to deal with people.

I have two out of three...

Just like 2LZ I've sat on stuff I was reluctant to sell just because I'd rather not deal with the CL brigade.

You are absolutely correct ,it isn't for everybody ,but it's still a skill that I think is a very important part of life ,and everybody should at least try to understand .
I often have people that want me to sell stuff for them ,or find something for them .To me it's fun ,and I do take it very seriously .I always have cash in my pocket and am ready to run out the door when a good deal shows up .
I also get fed up sometimes ,and just do something else .

I am going to pick up another car tonight. So far this year. 2 campers, 2 minivans, 2 trucks, and 2 cars. Working on a 3rd minivan too. I doubt the car will be here long. Only kept one truck and part of a camper.

http://www.ebay.com/itm/390845145367 trunk

http://www.ebay.com/itm/390845145367

Hard to pass on this $21 delivered. BARLOW set me up on this deal.


Gloves $14 lowes http://m.lowes.com/pd/Kobalt-X-Large...oves/50119553=

http://img.photobucket.com/albums/v4...psb90a9328.jpg

I bought some other stuff, but the salted nut roll was what mattered.

A new CSC TT250, heading over to pick it up in a little while.

At you get your new TT250, please start a new thread, and post lots of photographs. :tup:

Not sure what exact year, but about a 1998 Yamaha Grizzly 600. Weld, have any ideas.

http://i39.photobucket.com/albums/e1...psorshzpkr.jpg

http://i39.photobucket.com/albums/e1...psoparvp2j.jpg

http://i39.photobucket.com/albums/e1...psc6kmx9uf.jpg

Didn't buy it today, but got this valve adjuster tool today. Costs less than $7 and was delivered from China in 16 calendar days. 9mm for GY6 purposes. I have one in 10mm for my Honda road bike.

http://i722.photobucket.com/albums/w...pse6v8jl7o.jpg

Seller was dltlivinglife and the auction was titled "Cars Trucks Motorcycle ATV 9mm Valve Bolt Wrench Adjuster Repair Tool".

I like that but I didn't see it in the 8mm darn it!

You can get the 8mm, 9mm, and 10mm wrenches in a 3-pack for only $9.99. ;)

http://www.ebay.com/itm/3pcs-Cars-Tr...715487&vxp=mtr

Picked these up at a tag sale for $5 bucks each.

Egads! :wtf: That has got to be the best deal yet. :tup:

:hi:That's a good score ,that mustang is easily worth $200.00 in scrap !:hi::p

That is my wife's toy. 2008 with only 30k miles. We need to drive it more.

I don't know what a tag sale is, but DAMN that's a score!

A guy at work has one of those electric bikes for his grand daughter, she loves it! :)

bought new hydraulic clutch system for the hawk today. $41 shipped. Now I'm waiting for the slow boat from China! :D

Have you got any pictures of the hydraulic clutch set up ?I have a few for honda pit bikes and honestly they are nothing but trouble .I hope yours is different .

Lever
http://www.banggood.com/22mm-78inch-...p-1044389.html

Clutch Line
http://www.banggood.com/120CM-Off-ro...-p-961864.html

slave cylinder
http://www.banggood.com/CNC-Pull-Hyd...-p-978219.html

I wonder where you found those part numbers LOL!

Those look like the ones I have .I hope you have better luck than I have with them .

[QUOTE=SpudRider;217670]You can get the 8mm, 9mm, and 10mm wrenches in a 3-pack for only $9.99. ;)

http://www.ebay.com/itm/3pcs-Cars-Tr...715487&vxp=mtr[/QUOTE

I've adjusted valves only once and that was on my Polaris Ranger....I didn't think it was such a terrible ordeal at all .....just curious if these style wrenches make it all that much easier?