ChinaRiders Forums - gio 200cc beast cl special

Page 3 of 3

Show 40 post(s) from this thread on one page

ChinaRiders Forums (http://www.chinariders.net/index.php)

- ATVs (http://www.chinariders.net/forumdisplay.php?f=102)

- - gio 200cc beast cl special (http://www.chinariders.net/showthread.php?t=12757)

Weldangrind

10-23-2014 11:14 AM

Coincidentally, AtomicWedgie and I pounded the bushings out of his quad yesterday, and they were quite difficult to remove. We ended up using a half hacksaw to cut through the bushing, to relieve tension.

The Yamaha bushing is 307-22123-00. You need two.

Weldangrind

10-23-2014 11:16 AM

BTW, the bushings are in the frame, not the swingarm.

midlifekrisiz

10-23-2014 11:25 AM

Quote:

Originally Posted by Weldangrind (Post 174681)

BTW, the bushings are in the frame, not the swingarm.

oh that will be fun

FLASHLIGHTBOY

10-26-2014 10:01 PM

bushings

use a die grinder

All times are GMT -4. The time now is 05:13 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page