ChinaRiders Forums
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Pit/Pocket Bikes & Scooters (http://www.chinariders.net/forumdisplay.php?f=111)
-   -   TaoTao HELLCAT 125 speedometer From KMH TO MPH? (http://www.chinariders.net/showthread.php?t=22010)

scoot newb 04-03-2019 11:41 PM
I've read the 12” wheel speedo calibration setting/value should be 045 but I can't confirm. Not sure about any of your other questions.

Medic 04-07-2019 04:08 AM
So so sorry guys my wife ended up in the hospital (all is well). Our rep said just call Tao Tao directly. I told him that wasnt work for you guys. So he is going to make some calls and see what he can do for us. He has always been very quick with reply unlike me! Again sorry guys!

scoot newb 04-08-2019 11:50 PM
Quote:
Originally Posted by ShiftDX (Post 290451)
Got my speedometer in today, almost plug n play. The stock speedo has a female plug leading to the speedo wire, where as the new speedo has the male plug instead. All I did was hack off the plugs and swap them. Seems to be working nicely. Nice and bright! Also had two more single wires I didn’t find homes for on the new speedo but I just taped them off. Everything seems to be working as in indicators too. Not a bad buy.
Did you order the 4 speed or the 5 speed? What code did you use for calibrating the speedo?

Thanks

scoot newb 04-12-2019 12:41 PM
Quote:
Originally Posted by Medic (Post 305090)
So so sorry guys my wife ended up in the hospital (all is well). Our rep said just call Tao Tao directly. I told him that wasnt work for you guys. So he is going to make some calls and see what he can do for us. He has always been very quick with reply unlike me! Again sorry guys!
What number?

I've called the number listed on their site (1-855-675-2626) at different times throughout the last couple of weeks and just get a recording saying no one is available.

scoot newb 05-16-2019 07:40 PM
Quote:
Originally Posted by Tswan0910 (Post 304771)
So I have a taotao hellcat as well and had to buy the samdo speedometer too. You say it was plug and play but when I first plugged mine in the 3rd and 4th gear wires needed swapped around (no big deal) just curious if you had to do that? Also my speedo is reading zero after the plug swap. Did yours work right away or maybe I got a defective speedo? Also what calibration setting do you have? Any help would be appreciated


I have the same problem. Which wires need to be swapped?

jbodell11 05-21-2019 12:57 PM
Quote:
Originally Posted by scoot newb (Post 309310)
I have the same problem. Which wires need to be swapped?
Same problem as well. Any info? Also, does anyone have a picture or diagram of stock speed pickup wire colors and orientation? Thanks.

scoot newb 05-21-2019 01:18 PM
Yes. Another user posted a diagram on the cluster and which wire corresponds to which gear. I can post the diagram when I get home but if you can't wait just do a search it is in the street forums

scoot newb 05-21-2019 02:31 PM
Here it is. I can't find the original post but this was the image posted in it.

https://imgur.com/lFKI5Xg.jpg

kirbo7106 02-17-2020 10:52 AM
Quote:
Originally Posted by ShiftDX (Post 290451)
Got my speedometer in today, almost plug n play. The stock speedo has a female plug leading to the speedo wire, where as the new speedo has the male plug instead. All I did was hack off the plugs and swap them. Seems to be working nicely. Nice and bright! Also had two more single wires I didn’t find homes for on the new speedo but I just taped them off. Everything seems to be working as in indicators too. Not a bad buy.
When you sliced the speedo wires to the plug that came with the new speedo, what color wires from the sending unit went to what color wires on the speedo? Do you have a picture?
Thanks,
Dan-O


All times are GMT -4. The time now is 01:53 PM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.