Hi all I have a question about the Rocker arms Pins orientation. I had to do service of top end of my bike engine as one of the baring has fail on the camshaft, lucky, I have stop using the bike immediately when start hearing some ode noises in the engine. I did replace the rocker arms with pins but now I am not sure if I have installed the pins correctly… Where should be the flat spot of Pins orientated – UP towards petrol tank or Down towards ground? Thanks for Help
|
I will answer my self on the above question about orientation of Rocker arms pins.
First I have whach all videos on YouTube and on one I have spotted the correct orientation: CSC RX3 Engine teardown by Sifu Carlos https://youtu.be/aPvShHsSYjw?si=Ry42vvKOgCUcD-e8 Second I have asked CSC directly and after some time I have get answer: "The flat spot faces up and the 2 little oil holes face down." So I have asemble the bike and tested for 2 weeks already and can confirm that the above is correct All the best for everyone :yay: |
All times are GMT -4. The time now is 04:56 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.