Does anyone know what bike the KPM200 is closest to as far as a replica? I see people saying the Venom Ghost is a Honda CBF for example, the X22 is a ninja, etc. Just wondering what service manual I can get for the KPM200.

I'm sure you could get a service manual from American Lifan. I found the KPR service manual which uses the same engine. https://cdn.shopify.com/s/files/1/02...f?v=1636701098

KPM service manual
 

Does anyone have the service manual to the KPM 200? Also does anyone know the best place to buy individual parts for the KPM. I’m working on the clutch right now and might need a part replaced.
Thank you.

Service Manual https://cdn.shopify.com/s/files/1/02...f?v=1636701098

Parts: https://kpclubusa.com/

Just wanted to say, I ended up finding and adding a really nice aftermarket speedo. It came from Amazon: https://www.amazon.com/DKMOTORK-Moto...p/B07WW3L3Y8/r

Attached to my post are the wiring guidelines. Instead of replacing my existing speedo, I created a custom harness to piggyback off the existing speedo. If I had spent a ton more time on the wiring, I probably could have made it work and removed the stock speedo -- but I didn't want to be destructive.

https://i.imgur.com/oYq9YX3.png
https://i.imgur.com/GTocUCM.png

Great info on the guage cluster install, would love to see it on the bike too!

It's on my new KPM200 Resources site I built:
https://kpm200resources.com/aftermarket-speedometer/

does anyone know if the NGK CPR7EAIX-9 Iridium IX Spark Plug is compatible with the KPM200?

It will fit and work but is 1 step hotter than the recommended CPR8EAIX-9

Anyone run into an odometer issue with the KPM200? I've only rode about 7-8 miles according to my phone gps but the bike's odometer says I rode 15 miles. That's a huge discrepancy. Any tips on fixing the issue?

I just got a KMP 200 from a private seller and think they stripped the oil drain plug. Does anyone have the size/thread specs of the drain plug? I want to try an oversize plug before I have to do the full re-tap of the hole. Has anyone tried this?

Apologies for the extremely noob question since this is my first bike ever but my chain keeps loosening over a few days of riding, can anyone give me a solution in preventing that?

The stock chain gave me fits, had to replace a lost a tensioner. Got this one from Amazon and haven't had any issues since, even with a larger front sprocket:

https://www.amazon.com/gp/product/B0...e?ie=UTF8&th=1

I am probably early but has anyone identified the measurements of seals needed to rebuild the front forks? Is oil quantity same as the KPR200 even though these forks are inverted?