Vader 125 exhaust
 

Hey y’all I just got my Vader 125 in this week and have a carb waiting to be installed. I wanted to put a new exhaust on the bike before installing the carb. Ideally I would like a low mounted one. I have been looking at the grom aoRacing low mounted one to install. I have seen that it requires some modifications to fit and would like to avoid that if possible. I couldn’t find any definitive answers to see if there were any confirmed bolt right on exhaust kits. All the forums I was looking at had expired links. I have seen Honda monkey ones “might” fit and would buy the aoRacing money one if it did. If anyone could help it would be much appreciated

What you need to look for is exhaust for the old school honda DAX and original Monkey exhausts ( NOT the new re-released 125 Honda Monkey, the OLD Model ) on Ebay and Amazon,or probably AliExpress these are what will fit with no modifications. No Honda Grom exhaust will bolt right on and all will require heating / bending to fit due to the difference in the exhaust port orientation.


Here is a working link to one from WeBike in Japan , https://japan.webike.net/products/2023780.html i checked amazon and Ebay and did not see any i know will fit ,so check AliExpress .Unfortunately these exhausts are getting harder to find since Honda re-released the new Monkey ,but with enough digging you should be able to find something that will fit that isnt too expensive.

Alright thank you! That is very useful information

This place has dax/monkey exhaust and has good reviews and fast shipping.

https://www.motorkit.com/en/147-exhausts

This exhaust will work since it is 2 piece. It's missing a mounting bracket though so you will have to figure something out yourself. Add a ebay 51mm slip on and its probably the cheapest "bolt on" exhaust.

https://www.amazon.com/Motorcycle-Ex...6744836&sr=8-6