Quote:
Originally Posted by Pabesco
I'm trying to copy and paste a pic of the bike but it's. Of allowing me to do so. Any pointers on how to put pics in the posts. Thanks. Also the odometer is 1152 and I will be changing the oil and checking the lash as soon as I pick it up form my shipping company. I'm really looking forward to riding this bike. Thanks guys
|
FastDoc provided a good link describing how to post photographs on these forums.

Your bike is barely broken in.

Now is a very good time to change the engine oil; perhaps the previous owner did not change it.

Checking the valve lash only takes 15 minutes after you learn the procedure. If the valves need adjusted, it only takes another 15 minutes.

Make sure the piston is located at top dead center (TDC) on the compression stroke before you check the valve lash.

Both valves will be tight at TDC on the exhaust stroke, which is the wrong location. Both valves will be loose at TDC on the compression stroke, which is the correct place to adjust the valve lash.
Spud
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."

Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894