Quote:
Originally Posted by midlifemx5
Thanks Spud! I have another question for you or possibly Weldangrind. I ordered a new Mukuni carb today (The one that is recommended on here so much) I am going to free up the exhaust by gutting the cat, and I have a uni foam filter to go in the slightly modified stock air box
(I opened up the intake holes about double the original size) I operate primarily at 5000 - 8000 ft above sea level, where would you recommend I start with the jetting, with these conditions in mind?_
P.S. this is a 229cc engine
|
Can engines even run at that elevation?
I'd start with a 115 main and a 30 slow. If it won't start despite adjusting the pilot mixture screw, go to a 27.5 slow.