Quote:
Originally Posted by Weldangrind
Make sure that a replacement CDI has the same dimensions. As you've seen, the pinout is the same, so that's not an indicator.
I recommend that you adjust the valves.
|
I adjust the valves at 300 km about 180 kms ago, It took my several times adjusting to get the feeler gauge to read right after I rotated the engine after adjustment, I used the specs provided on the manufactures plate: .04mm intake and .06mm exhaust. The adjusting wasn't as bad as getting the plastics to line back up because the gas tank had to be unbolted and moved back in order to get valve cover off. I will check the valves to make sure they are still in spec sometime this week.