Quote:
Originally Posted by Co2
The rx3 have Rpm clock/Tachometer , i interested where measure that rpm data coming ? , from statör? or ignition coil?
|
Hi Co2.
The manual states that the RPM signal for the tachometer is generated by the CDI module, Y/B (yellow/black?) wire.
My suggestion: remove the seat and look there for any loose connector, specially those at the CDI module. Will help doing that with the engine running at idle, looking at the RPM indicator while moving the cables: if the RPM needle jumps or becomes alive again, you'll got the point of faulty connection.