The only difficult pieces to remove are the elements of the lower shock mount, located in the front of the rocker/knuckle/arm. In this instance you must carefully pry off the dust seals
before you can remove the inner elements.
I use a sharp pick to pry around the circumference of half the seal, until the seal finally releases. After both dust seals are removed, the rest of the pieces come out easily.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894