Today I removed the valve cap on the stock shock absorber. Underneath I found a standard schrader valve.
I measured the pressure in the shock with my tire gauge, and it read 67.5 psi. The specified press is 44 psi. Perhaps the high pressure contributed to the harsh ride I experienced with this shock absorber.
I lowered the pressure to the standard setting of 44 psi. If the shock is not performing properly for you, you might want to check the air pressure. However, the shock cartridge contains very little air, so it might not make much of a difference.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894