[JerryHawk250]

Originally Posted by PANDEMIC

ok so valve adjustment question.

So I removed the plug to see the top center T mark.

I removed the side cover to access the bolt to rotate the flywheel counterclockwise stopping on the T the valves where super tight so loosened and set them to .002

I rotated the flywheel 3 times stopped on the T mark again and the valves are so very loose rotated it again stopping on the T mark its back at .002

so when should I set the valves when it is on the loose setting or tight setting?

loose setting. Sounds like you set them on the wrong cycle.