ChinaRiders Forums - View Single Post - Zongshen 200GY-2: Teikei MV28 Carburetor Tips

oviking99 · 03-20-2019, 03:55 PM

The carbs are identical. Both made by TK with one exception, the engine intake port side is 2mm larger on the new one. So now I either machine out the old rubber manifold

, look for a proper manifold

, or see if I can use the internals of the new carb to rebuild the old.

03-20-2019, 03:55 PM	#18
oviking99 Join Date: Jun 2013 Location: Cumming, GA Posts: 303	The carbs are identical. Both made by TK with one exception, the engine intake port side is 2mm larger on the new one. So now I either machine out the old rubber manifold , look for a proper manifold , or see if I can use the internals of the new carb to rebuild the old. Attached Images
	0