|
Don't over think it. First check that there is no excess play in the stirring neck. If all is good and snug, the next thing i would do is deflate the tire. Rotate the tire on the rim 90 to 180 degrees. It's possible that the tire is not beaded evenly on the rim. unless you have excessive play in the axle and rim i would think the bearings are good.
Did you clean the brake rotors and pads before riding the bike? There is a shipping film on the rotors that really needs to be cleaned off. This would cause any pulsating or pulling when the brakes are applied.
__________________
2025 Lifan KPT 400
2024 Linhai 300 ATV 4x4
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S (Sold)
2004 Honda ST 1300 (Sold)
2016 Black Hawk 250 (sold)
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel
|