|
Quick update, used Amazon message to ask Moto-Pro for the bolt and they’re sending all the rear linkage hardware, very cool. In the meantime I bought a bolt and I’m good to go. One last valve check and oil change and hopefully running tomorrow.
Sorry for the needy post, wanted to get the bike on the ground after the front end was done.
The chain is still a bit off, the guide needs to be modified and it looks like it could use a few mm off the right spacer and a the same added to the left. But it should work well enough as is.
The carb is sweet, thanks Thumper. I’m using your 125/45 deal.
|