Quote:
Originally Posted by jc3
So I drilled out the mixture screw. Chopped the security bolt tops off. Here are some pictures from inside
No way to adjust needle or float
|
I learned how to shim those needles with a tiny washer(s) on racks of CV carbs (old DOHC Suzukis!).
Needle shim can be done on these OEM Youall carbs too. I have about a 1mm shim (stainless steel washer) on mine.
https://www.chinariders.net/showpost...79&postcount=5
That post 5 is in the Templar resource
https://www.chinariders.net/showthread.php?t=32177
Oh, and I thought you just bent the metal arm that presses the needle valve (fuel intake) to adjust float height? That is what I've always done.