ChinaRiders Forums - View Single Post

Thumper · 05-30-2023, 08:47 AM

I am at about 800 ft as well. I went from 40 to 42 on the pilot, 120 to 125 on the main. At about 7/8 ths turn on the airmix screw. I get no change in rpm when I spray starter fluid arond the mounts (sealed up. I think).

I agree that you must be too rich.

I noticed the height difference on the jet (pilot, I think) when installed, but it is still below the fuel level in the bowl, so no problem as far as I can tell.

05-30-2023, 08:47 AM	#13
Thumper Join Date: Feb 2021 Location: Kansas City Posts: 2,971	I am at about 800 ft as well. I went from 40 to 42 on the pilot, 120 to 125 on the main. At about 7/8 ths turn on the airmix screw. I get no change in rpm when I spray starter fluid arond the mounts (sealed up. I think). I agree that you must be too rich. I noticed the height difference on the jet (pilot, I think) when installed, but it is still below the fuel level in the bowl, so no problem as far as I can tell. __________________ No matter where you go, there you are... "It's the environment, stupid" ("No planet, no jobs" )
	0