View Single Post
Old 11-28-2023, 08:02 PM   #9
bigdano711   bigdano711 is offline
 
bigdano711's Avatar
 
Join Date: Jun 2023
Location: Big Piney, WY
Posts: 568
Quote:
Originally Posted by XLsior View Post
How does the idle behave when the bike is up to running temp...?


If you turn the idle adjustment knob fully out does the rpm go under 1000rpm or lower and konk out?



1/2 turn out on the A/F mix from seated is a bit under spec the ideal window is between 1 to 2 full turns.


Seems the air density at 6000ft does have quite an effect... Most of us low landers under 1000ft seem to be on the 40/125 mid clip baseline for stock CG250 specs.
That question seems to be something to try? I will try that tomorrow and report back. I should update where the carb is at:


Main Jet: 105
Pilot Jet: 38
Needle: Position 3 or middle
Air Screw: 1.25 turns out


I have been busy making some vids:





__________________
2023 Hawk 250 from XPRO off of Amazon
MOUNTAIN MAN RC + MOTO on YouTube

"If there were more bloody noses, there would be less wars." - Hagbard Celine

"Someday, after mastering the waves, the winds, the tides and gravity, we shall harness for God the energies of love and then, for the second time in the history of the world, man will have discovered fire." - Pierre Teilhard de Chardin


 
Reply With Quote