ChinaRiders Forums - View Single Post

TeamCheap · 08-28-2008, 08:41 PM

I keep thinking that most things dissolve when exposed to gas and the best patch idea may come apart shortly after its put into service.

Here is an interesting cap.
Acerbis Dry Break conversion fitting
If you have enough flat surface to mount it to the tank and could get some stainless steel bolts/washers around it to secure it this would be very nice.

Just my 2 minutes of looking at this problem.

EDIT:OHH yeah that little nipple in the middle of the cap is where the vent tube goes and it would be best with an inline check valve.

08-28-2008, 08:41 PM	#15
TeamCheap Join Date: Jun 2006 Location: directly under the earths sun............NOW Posts: 2,302	I keep thinking that most things dissolve when exposed to gas and the best patch idea may come apart shortly after its put into service. Here is an interesting cap. Acerbis Dry Break conversion fitting If you have enough flat surface to mount it to the tank and could get some stainless steel bolts/washers around it to secure it this would be very nice. Just my 2 minutes of looking at this problem. EDIT:OHH yeah that little nipple in the middle of the cap is where the vent tube goes and it would be best with an inline check valve.
	0