ChinaRiders Forums - View Single Post

tigertamer · 09-29-2008, 07:00 AM

You didn't mention what year bike you have!

If you have an electronic tach, The CDI drives the coil and tach.

I would assume the CDI connector is good, if your bike is getting good spark from the coil.

That leaves the connector under the headlamp fairing. Look for a Black/Yellow wire in the connector, and inspect it for tightness of fit. Also, Make sure you get battery voltage at the Black wire, and good continuity to ground on the Green wire at the same connector.

Good luck, Brother,
Tigertamer

09-29-2008, 07:00 AM	#5
tigertamer Join Date: Jul 2008 Location: Wheeling, West Virginia Posts: 683	You didn't mention what year bike you have! If you have an electronic tach, The CDI drives the coil and tach. I would assume the CDI connector is good, if your bike is getting good spark from the coil. That leaves the connector under the headlamp fairing. Look for a Black/Yellow wire in the connector, and inspect it for tightness of fit. Also, Make sure you get battery voltage at the Black wire, and good continuity to ground on the Green wire at the same connector. Good luck, Brother, Tigertamer __________________ 07 H-D XL883C 06 LF 200GY-5 Yin and Yang CAUTION Obey The Traffic Regulation. Always Wear a Helmet. Don't Ride After Drinking Wine. Before Operation, Read The Owners Manual Carefully.
	0